Function

Wire Measuring, Both Ends Stripping, Both Ends Half-Strip, Single End Crimping, Single End Soldering, Single End Twisting, Single End Flux, Full and/or Half Stripping with Programmable Strip Length, Programable Blade Depth, Programable Crimping Position, Automatic Crimp Height Adjustment (Servo press), Flux Volume, Panel Setting of Solder Volume, Elimination of Solder Oxidation Membrane, Terminal Transferring Soft Clamp, Compulsion Ventilation of Solder and Flux Unit

Capacity^(*1)

1.2sec/pc.(Cutting length 100mm soldering side: strip length 3mm in case of pre-soldering length 1mm)

Wire size

0.08-1.25mm²(AWG#28-#16)O.D.0.4 -3.4mm

Cutting length^(*2)

25-600mm(2,000mm)

Cutting length

Cutting Length below 100mm: Variation 0.5mm＋(Set Length ×0.002)
Cutting Length over 100mm: Variation 1.0mm＋(Set Length ×0.002)

Stripping length

No.1:1.0-10.0mm No.2:1.0-25.0mm(Soldering Length:1-25mm, Twisting Length :3-25mm)

Cut Depth

Max.Adjustment 3mm 150step(1step=0.02mm) Pullback

Press Capacity

24,500N(equivalent to 2.5ton)Servo Press With Inching SW

Detector

Air pressure down, Wire presence, Wire overload, Stripping error, Crimp error, Terminal presence, Terminal overload, Wire parameter error power power

Power source

3 phase AC200V/220V(within ±10 %)50/60Hz 10A

Compressed air

0.5MPa(5kgf/cm²), Approx.180NL/min(Use clean dry air)

Dimension, Mass

1,250W ×800D×1,480H(mm), Approx.590kg

Option

Wire Reel stand(WRS18, WRS20DR), Paper winding device, Wire joint,3 colors indication light, Belt chute, Simple liquid face detector of solder and flux, Crimp force device, Application conversion KIT for another brand