The WPM-MAX3 strips cable up to 150 mm² — the cross-section range of battery, charging and heavy power cable, where a bench stripper stalls. A 2,300 W drive and 0.8 MPa air supply handle the outer jacket and the insulation underneath, with stripping accuracy of ±0.2 mm.
It takes cable from 5 mm to 23 mm outside diameter and conduit up to Φ25, with cutting length up to 400 m. The 7-inch touch screen runs in Chinese and English, so the same machine is usable by an operator who does not read the other language.
This is a floor machine, not a bench tool: 2,300 W and a 150 mm² capacity mean real force on the cable, and the frame is built for it. Power is 220 V or 110 V, 50/60 Hz.
Key Features
1. Strips up to 150 mm² cross-section — battery and heavy power cable range.
2. Cable outside diameter 5 – 23 mm, conduit up to Φ25.
3. 2,300 W drive with 0.8 MPa air for thick jackets.
4. Stripping accuracy ±0.2 mm.
5. Cutting length up to 400 m on a single setup.
6. 7-inch touch screen in Chinese and English.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-MAX3 |
|---|
| Function | Automatic large cross-section cable stripping machine |
|---|
| Power | 2,300 W |
|---|
| Power supply | 220 V / 110 V, 50/60 Hz |
|---|
| Display | 7-inch touch screen (Chinese / English) |
|---|
| Cable outer diameter | 5 – 23 mm |
|---|
| Maximum cross-section | 150 mm² |
|---|
| Air pressure | 0.8 MPa |
|---|
| Maximum conduit diameter | Φ25 |
|---|
| Stripping accuracy | ±0.2 mm |
|---|
| Cutting length | Up to 400 m |
|---|
Applications
— Battery and charging cable stripping — 35–150 mm².
— New energy vehicle high-voltage cable preparation.
— Heavy power cable where a bench stripper stalls.
— Long cable runs — cutting length up to 400 m.