The WPM-4220-2Z is a desktop automatic screw locking machine with a 200 mm X stroke, 420 mm Y1/Y2 strokes and a 135 mm Z stroke, driving one screw per cycle in 1 to 1.5 seconds. It is used on toys, small appliances and electronic assemblies where screws are small and positions repeat.
Driving small screws by hand into plastic bosses cross-threads them: the screw starts at an angle, the thread cuts a second path, and the boss splits. On the WPM-4220-2Z the screw is held by vacuum at the bit tip, so it stays square to the hole until the thread engages, and the Z stroke is set in the program rather than by the operator's hand. Repeatability is +/-0.03 mm, which keeps the driver over the same boss across a production run without re-teaching.
The WPM-SL5331 is the larger gantry unit with two fixtures and a central hopper, and the JW-FD02 is the hand-held version at up to 70 screws per minute. The WPM-4220-2Z sits between them: a single-head desktop machine with 15 stored programs of 99 points each, touch-screen entry and SCM control, for product families that change over regularly and need a program per model.
Key Features
1. 1 to 1.5 seconds per screw, with pick-up, transfer and drive carried out in a single cycle.
2. Repeatability of +/-0.03 mm from a precision closed-loop stepper motor on all axes.
3. Vacuum suction holds the screw at the bit tip until the thread engages, so small screws start square to the hole.
4. Program memory stores 15 sets of 99 points, recalled from the touch screen when the product model changes.
5. The 200 mm (X) by 420 mm (Y1/Y2) by 135 mm (Z) envelope covers a full toy or appliance housing in one program.
6. SCM and touch-screen control on a 220 V 50/60 Hz supply and 0.4-0.6 MPa shop air, rated for 5-40 degrees C and 20-90% RH.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-4220-2Z |
|---|
| Machine type | Desktop automatic screw locking machine |
|---|
| Locking screw range | X 200 x Y1 420 / Y2 420 x Z 135 mm |
|---|
| Locking screw time | 1-1.5 sec/pc |
|---|
| Repetitive accuracy | +/-0.03 mm |
|---|
| Program record | 15 sets, 99 points per set |
|---|
| Feeding mode | Vacuum suction |
|---|
| Control system | SCM and touch screen |
|---|
| Motor system | Precision closed-loop stepper motor |
|---|
| Input power supply | 220 V 50 Hz/60 Hz |
|---|
| Working air supply | 0.4-0.6 MPa |
|---|
| Working temperature / humidity | 5-40 degrees C / 20-90% |
|---|
Applications
— Toy assembly: battery covers, wheel brackets and motor mounts driven into ABS and PP housings.
— Small appliances: internal brackets and board standoffs fixed in kettles, fans and kitchen machines.
— Consumer electronics: speaker boxes, power strips and remote-control housings assembled with small screws.
— Electrical accessories: terminal and cover screws driven in switches, sockets and adapters.
— Lot production of sub-assemblies where one stored program per model is recalled at changeover.