
Blue Nylon PVC Insulated Ring Terminals - 2000pcs/Roll JW-TM01
Model No: JW-TM01
Specifications
Material: CopperTemperature Rating: 75/105°CSheath: Nylon PVCSurface Treatment: Tin platingQuantity: 2000pcs/Roll- Inquiry now

JW-TM01 is an insulated ring terminal: copper body, tin plated, nylon/PVC sleeve rated 75/105°C, supplied 2000 pieces per roll on a continuous carrier strip. The closed eye takes a stud or screw and holds the conductor even when the screw is backed off.
Bulk terminals feed badly in an applicator - they bridge in the track and stop the press mid-lot. TM01 is cold-pressed onto a continuous strip at fixed pitch, so the applicator indexes one terminal per stroke and cuts the carrier after crimping. Tin plating over copper keeps the barrel from oxidising in storage, and the sleeve extends past the barrel onto the insulation so bending load is carried by the sleeve rather than the strand bundle.
In the JW-TM series, TM01 is the only closed-eye type. JW-TM02 is a non-insulated open fork for the same screw terminals, and JW-TM05 is an insulated spade covering a 3.2 to 10.5 mm bolt range. Where vibration or a slack screw could release a fork, the ring in TM01 is the correct choice.
1. 2000 pieces per roll on a continuous carrier strip, pitched for automatic crimp applicators rather than loose-piece hand tools.
2. Copper body with tin plating on barrel and eye, limiting oxide build-up between plating and crimp and keeping contact resistance stable.
3. Nylon/PVC sleeve rated 75/105°C, covering the barrel and the first section of insulation at the crimp exit.
4. Closed ring eye spreads clamp load around the full stud, so the terminal stays on the screw when it is loosened for service.
5. Cold-pressed construction - barrel formed from the strip and the carrier notched for a clean cut after the crimp closes.
6. Colour-coded sleeves across the range, letting the operator identify wire size at the bench without measuring the barrel.
| Parameter | Specification |
|---|---|
| Model | JW-TM01 |
| Product type | Insulated ring terminal, continuous strip |
| Material | Copper |
| Sheath | Nylon / PVC |
| Surface treatment | Tin plating |
| Temperature rating | 75/105°C |
| Quantity | 2000 pcs/roll |
| Sleeve colours | Red, blue, yellow, black (as supplied) |
| Supply form | Carrier strip for applicator feed |
— Control cabinet wiring - stranded copper control wire, ring terminal on stud-type terminal blocks and earth bars.
— Machine tool electrical panels - power feed conductors terminated on threaded studs where the screw may be loosened for service.
— Appliance and HVAC assemblies - internal wiring on compressor and fan motor studs at 75/105°C.
— Automotive and off-highway harnesses - ground straps and battery-adjacent circuits where vibration rules out an open fork.
— Distribution boards - neutral and earth connections on busbar studs, crimped from strip on an automatic applicator.






