Continuous PIN Terminals - PVC Insulated, Copper, Tin Plated JW-TM04
Continuous PIN Terminals - PVC Insulated, Copper, Tin Plated JW-TM04 Thumb
Video Thumbnail

Continuous PIN Terminals - PVC Insulated, Copper, Tin Plated JW-TM04

📅 2023-01-08 👁️ 953
  • Model No: JW-TM04

  • Specifications

    Material: Copper
    Sheath: Nylon/PVC
    Temperature Rating: 75/105°C
    Surface Treatment: Tin plating
    Features: Aging resistance, high-temperature resistance, firm wiring, oxidation prevention
  • Inquiry now

JW-TM04 is a continuous pin terminal: copper body, tin plated, nylon/PVC sleeve rated 75/105°C, supplied on a carrier strip so an applicator can crimp and cut one pin per stroke. The pin enters a terminal block or a push-in clamp, and the sleeve protects the barrel and the insulation entry.

Ferrules and pins fail in two ways on a production line: the barrel oxidises before the crimp is made and raises resistance, and the sleeve cracks where the wire bends. TM04 addresses both - tin plating over copper limits oxidation on the barrel, and the sleeve is specified for aging and high-temperature resistance so it stays flexible at the insulation entry. Crimping from strip keeps pin alignment constant instead of relying on hand-held placement.

TM04 sits between JW-TM03 and JW-TM05 in the series. TM03 covers male, female and flag push-on bodies; TM05 is an SVN spade for studs from 3.2 to 10.5 mm at 19 to 48 A. TM04 is the pin style for terminal blocks and push-in clamps, where the conductor is inserted rather than screwed or pushed onto a tab.

Key Features

1. Continuous strip supply, so the applicator crimps and cuts one pin per stroke with the barrel aligned to the tool each time.

2. Copper body with tin plating, preventing barrel oxidation between plating and crimp and keeping contact resistance low in storage.

3. Nylon/PVC sleeve rated 75/105°C, specified for aging and high-temperature resistance at the insulation entry.

4. Pin body sized for terminal blocks and push-in clamps, where the conductor is inserted straight rather than screwed down.

5. Crimp barrel formed onto the strand bundle for firm wiring, so the pin cannot rotate or pull back inside the sleeve.

6. Colour-coded sleeves across the range, allowing wire size to be read at the bench without measuring the barrel.

Technical Specifications

ParameterSpecification
ModelJW-TM04
Product typeContinuous pin terminal
MaterialCopper
SheathNylon / PVC
Temperature rating75/105°C
Surface treatmentTin plating
PropertiesAging resistance, high-temperature resistance, firm wiring, oxidation prevention
Sleeve coloursBlue, red, orange, green
Supply formCarrier strip

Applications

— Terminal block wiring - control and signal conductors inserted into screwless push-in clamps in panel builds.

— PCB header termination - pin terminals on board-level connectors where a stranded wire must enter a cage clamp.

— Sensor and instrument looms - 75/105°C rated pins on transmitters mounted in warm enclosures.

— Appliance control boards - internal wiring to push-in connectors on controller PCBs, crimped from strip on an applicator.

— Machine wiring retrofit - field terminations on existing terminal blocks where aging resistance matters more than current rating.

Insulated tube pin terminals in red, blue, green and orange on stripsRed, blue and yellow insulated fork terminals on strips rated 19A to 48ARed, yellow, blue and black insulated round terminals on carrier stripsInsulated pin terminals in red, blue and white strips with copper tube drawingNylon PVC insulated sleeve terminal size table listing EVN modelsLarge EVN sleeve terminal table with L, B and F dimensionsDouble wire barrel terminal size table beside copper end close-upSleeve terminal details: PVC sheath, tin plating and multi-colour options
Continuous PIN Terminals (CE PVC Insulated)
Continuous PIN Terminals (CE PVC Insulated)

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each