JW-TM02 is a non-insulated copper fork terminal, tin plated, in 2.8, 4.8 and 6.3 mm spade widths for PH, VH, JST and spade connector types. It is UL and CE certified and supplied on a continuous strip for applicator crimping. The open throat slides under a screw without the screw being removed.
An insulated terminal hides the crimp behind a sleeve and caps the working temperature at the sleeve rating. TM02 leaves the barrel open, so crimp height and strand fill can be checked at inspection, and the joint runs at the temperature of the connection rather than of the plastic. Tin plating on copper keeps contact resistance stable against brass and tinned terminal blocks, and the open throat means a screw only needs backing off for service.
Compared with the JW-TM01 ring terminal, TM02 trades the closed eye for serviceability: the fork is added or removed with the screw in place, but it releases if the screw loosens. JW-TM03 covers the same mating styles with a brass body and nylon sleeve where an insulated joint is specified.
Key Features
1. Non-insulated barrel, so crimp height, strand fill and any withdrawn strands are visible at inspection.
2. Copper body, tin plated, for stable contact resistance on brass and tinned terminal blocks over repeated mating.
3. Open fork throat in 2.8, 4.8 and 6.3 mm widths, matching PH, VH, JST and spade tabs without an adapter.
4. UL and CE certification for the terminal as supplied, allowing use in certified panel and appliance assemblies.
5. Barrel and fork are formed from one copper strip with no brazed joint, removing a dissimilar-metal interface at the crimp.
6. Continuous strip supply, so a benchtop applicator indexes and cuts each terminal instead of the operator handling loose parts.
Technical Specifications
| Parameter | Specification |
|---|
| Model | JW-TM02 |
|---|
| Product type | Non-insulated fork (spade) terminal |
|---|
| Material | Copper |
|---|
| Surface treatment | Tin plating |
|---|
| Certifications | UL, CE |
|---|
| Terminal sizes | 2.8 / 4.8 / 6.3 mm |
|---|
| Connector types | PH, VH, JST, spade |
|---|
| Insulation | None |
|---|
| Supply form | Carrier strip |
|---|
Applications
— PCB terminal blocks - PH and VH headers on control boards, stranded wire crimped with a 2.8 or 4.8 mm fork.
— Relay and contactor wiring - coil and contact tabs in panel assemblies where the screw stays in place during service.
— Sensor and switch looms - JST and spade tabs on limit switches, proximity sensors and solenoid valves.
— Appliance internal wiring - 6.3 mm spade tabs on heating elements and motor terminals at joint temperature.
— Automotive sub-assemblies - non-insulated fork terminations on fused circuits where crimp inspection is part of the quality gate.