JW-AP12 is an OTP applicator die mold for JST terminal crimping machines, supplied in both horizontal and vertical crimping versions. It covers OTP U-shaped open-barrel terminals and the pre-insulation nylon ring type.
The two versions share the die body, the terminal seat and the mounting, and differ in the direction the ram closes: horizontal for a side-closing station, vertical for a top-closing press. The terminal runs along a long open channel ahead of the crimp position, so a row of terminals is supported on both sides of the anvil and stays in line as it is indexed forward. The nylon ring version uses a separate seat form to locate the insulation collar clear of the crimp.
It is specified as a replacement die where the terminal family is already defined on an existing JST applicator, and as a custom die where the barrel dimensions or the ring seat fall outside the standard U-shape range.
Key Features
1. OTP U-shaped die seat for open-barrel terminals, with a separate seat form for pre-insulation nylon ring terminals
2. Horizontal and vertical crimping versions built on the same body and mounting
3. Long open feed channel ahead of the crimp position, supporting the terminal row on both sides of the anvil
4. Spring arm and stripper linkage at the entry, holding the terminal in line as it reaches the crimp position
5. JST terminal crimping machine mounting, direct replacement on the applicator station
6. Custom die dimensions on request, for terminals outside the standard U-shape and ring ranges
Technical Specifications
| Parameter | Specification |
|---|
| Model | JW-AP12 |
|---|
| Crimping type | Horizontal and vertical crimping |
|---|
| Mold type | OTP U-shaped mold, pre-insulation nylon ring type |
|---|
| Compatibility | JST terminal crimping machines |
|---|
| Application | Terminal crimping applicator, terminal press machine |
|---|
| Customization | Customizable terminal applicator die |
|---|
Applications
— JST terminal crimping machines running OTP U-shaped open-barrel terminals
— Pre-insulated nylon ring terminals crimped on the same applicator station
— Harness lines that crimp ring lugs, butt splices and ferrules within one terminal family
— Replacement or second die where the terminal drawing differs from the standard U-shape
— Vertical press stations that have to hold the same crimp as the horizontal line