The JW-TC05 is a stamped terminal connector made to drawing, in stainless steel or copper alloy, for automotive and PCB applications where the catalogue geometry does not fit. Base metal is brass, phosphor copper, beryllium copper or stainless steel SUS304/301, with tin, nickel, silver or gold plating, at a minimum order of 8,000 pcs.
A custom terminal fails for reasons that have nothing to do with the drawing: the plating builds up on the contact face after the part is formed, the sheared edge is left bare and corrodes, or the stamping burr scores the mating pin. The JW-TC05 is quoted with the plating route as a process decision - first punching then plating leaves the sheared edge covered, while first plating then punching keeps the contact area free of plating build-up at the cut. Parts are run on imported Japanese high-speed precision continuous punching machines, with injection moulding available for overmoulded versions, and each lot is checked on projector, 2.5D tester, tensile tester, hardness tester and RoHS tester.
The difference from JW-TC01 through JW-TC04 is that those are fixed catalogues: 2.54 mm 4-position, 5.08/4.2 mm 4-pin, 5.08 mm tube plug and 4.2 mm Mini-Fit. JW-TC05 has no fixed pitch, because the geometry comes from the customer drawing - the constant is the material and plating set, the salt-spray check and the 8,000 pcs tooling quantity.
Key Features
1. Geometry produced to customer drawing, with no catalogue pitch constraint, so a terminal can be matched to an existing housing cavity.
2. Two plating routes offered: first punching then plating, which covers the sheared edge, or first plating then punching, which keeps the contact area clear at the cut.
3. Base metal in brass, phosphor copper, beryllium copper or stainless steel SUS304/301, covering both spring contacts and corrosion-resistant bodies.
4. Tin, nickel, silver and gold plating, with colour as material, gold or silver for plating identification on the line.
5. Salt spray test as the oxidation check, with a RoHS tester in the inspection set alongside projector, 2.5D tester, tensile tester and hardness tester.
6. Run on imported Japanese high-speed precision continuous punching machines, with high-speed electric injection moulding for overmoulded parts, at 8,000 pcs MOQ.
7. Certified to UL, SGS, MSDS, CE, ISO9001, RoHS, REACH, CQC, TUV, PAHS, PFOS and PFOA.
Technical Specifications
| Parameter | Specification |
|---|
| Model | JW-TC05 |
|---|
| Product type | Custom stamped terminal connector (OEM) |
|---|
| Material | Brass, phosphor copper, beryllium copper, stainless steel SUS304/301 |
|---|
| Surface treatment | Tin plating, nickel plating, silver plating, gold plating |
|---|
| Color | Material primary color, gold, silver |
|---|
| Oxidation test | Salt spray test |
|---|
| Electroplating process | First punching then plating; first plating then punching |
|---|
| MOQ | 8,000 pcs |
|---|
| Production equipment | Imported Japanese high-speed precision continuous punching machines, high-speed electric injection molding machines |
|---|
| Testing equipment | High-precision projector, 2.5D tester, tensile tester, hardness tester, RoHS tester |
|---|
| Certifications | UL, SGS, MSDS, CE, ISO9001, RoHS, REACH, CQC, TUV, PAHS, PFOS, PFOA |
|---|
Applications
— Automotive harnesses: non-standard terminal bodies for body, lighting and sensor connectors on a vehicle-specific loom.
— PCB assemblies: stamped pins and tabs for board-level connection where no standard header fits the footprint.
— Appliance and power tool wiring: custom blade or receptacle terminals matched to an existing housing.
— Instrument and control enclosures: earth and shield terminals stamped to suit a particular chassis cut-out.
— OEM replacement programmes: second-source stamping of a terminal already specified on a customer drawing.