JW-AP18 is a JST horizontal and straight crimping mold for European terminal machines, with an OTP U-shaped die set. It covers horizontal and vertical crimping and is mounted as an applicator die.
The body combines a horizontal crimp station with a straight entry in one block, and the upper section carries a round ram cap that seats against the press ram. A side guide arm holds the terminal strip at the die centre line, so the strip does not drift sideways between strokes. Because both orientations are built into the same body, a change between horizontal and straight work is a die change rather than an applicator change.
It fits European-style terminal crimping machines with JST-pattern applicator mounts and serves as the replacement die where the existing tooling is JST-pattern. Lines set up for JST terminal families can move between horizontal and straight terminals without a second frame on the bench.
Key Features
1. Combined horizontal and straight die form in a single applicator body
2. OTP U-shaped die profile for open-barrel U terminals
3. Round ram cap on the upper block for direct coupling to the press ram
4. Side strip guide arm that holds the terminal chain on the die centre line
5. JST-pattern mounting for European terminal crimping machines
6. Changeover between horizontal and vertical crimping without a second applicator frame
Technical Specifications
| Parameter | Specification |
|---|
| Model | JW-AP18 |
|---|
| Mold type | Horizontal and straight, OTP U-shaped |
|---|
| Crimp orientation | Horizontal and vertical |
|---|
| Terminal form | OTP U-shaped terminals |
|---|
| Machine fit | European terminal crimping machines |
|---|
| Application | Terminal applicator die |
|---|
Applications
— European terminal crimping machines with JST-pattern mounts, horizontal crimping of chain-fed U terminals
— Harness shops running straight-entry terminals on the same press as horizontal terminals
— Die replacement on an existing JST applicator, keeping the frame and ram setting unchanged
— General cable harness assembly with strip, crimp and pull-test on chain terminal reels
— Production cells that build one terminal family per campaign and reset orientation between campaigns