Terminal Machine Blades & Dies - DC53 Steel, 60 Hardness JW-AP08
Terminal Machine Blades & Dies - DC53 Steel, 60 Hardness JW-AP08 Thumb
Video Thumbnail

Terminal Machine Blades & Dies - DC53 Steel, 60 Hardness JW-AP08

📅 2023-01-07 👁️ 461
  • Model No: JW-AP08

  • Specifications

    Material: DC53 Japanese Steel
    Hardness: 60 degrees
    Lifespan: 50 million+ cycles
    Treatment: Vacuum heat processed
    Design: Custom terminal specifications
    Application: Wire strip and crimp machines
  • Inquiry now

JW-AP08 is a blade and die set for the terminal machines used in wire stripping and crimping. Where a single OTP blade covers one cutting position, this set covers the whole tool station: cutting blades, stripping blades and the forming dies that close the terminal, supplied together so the upper and lower halves are matched.

The set is made from Japanese DC53 steel, vacuum heat processed to 60 hardness, with a rated life of 50 million cycles or more. Because the blades and dies are produced as one group, the cutting clearance between upper and lower parts is set at build and does not have to be re-shimmed on the machine. The die cavity and the blade opening are cut to the terminal drawing rather than to a stock size, which is where the set differs from a general replacement blade.

It is ordered against the terminal specification and the machine model, and is used both on new tooling builds and as a full replacement when a station has been run past its blade life. Supplying the group together keeps strip depth and crimp height consistent after a change.

Key Features

1. Material: Japanese DC53 steel for blades and dies alike, so the cutting and forming parts wear at a similar rate.

2. Hardness: 60 HRC after vacuum heat processing, holding the die cavity and the blade edge through a long production run.

3. Matched set: upper and lower blades and dies are made as one group, with the cutting clearance set at build.

4. Custom geometry: the blade opening and die cavity are cut to the terminal specification, not to a catalogue size.

5. Service life: rated at 50 million cycles or more per set under normal terminal machine operation.

6. Coverage: one set supplies the cutting, stripping and forming positions of a strip-and-crimp station.

Technical Specifications

ParameterSpecification
ModelJW-AP08
ItemTerminal blade and die set
MaterialDC53 Japanese steel
Hardness60 HRC
TreatmentVacuum heat processed
Service life50 million+ cycles
GeometryCustom, per terminal specification
ContentMultiple blade and die profiles (photo)
ApplicationWire strip and crimp machines

Applications

— Terminal strip-and-crimp machines in wire harness plants - cutting, stripping and terminal forming in one station.

— Tooling builds for a new terminal part number, where the blade and die group is made to the terminal drawing.

— Full station replacement after the original blades and dies have reached end of life together.

— Machines running several terminal families, where a matched set is held per terminal number.

— Rebuilt terminal machines that need the complete tool group rather than individual blades.

Assorted crimping blades and dies for terminal machines laid out on grey surfaceClose overhead view of assorted terminal crimping blades and U-shaped diesRow of crimping blades, punches and small die blocks on white background
Terminal Machine Blades & Dies

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each