Terminal Cutter Block & Blade Set for Wire Processing Machines JW-BL05
Terminal Cutter Block & Blade Set for Wire Processing Machines JW-BL05 Thumb Terminal Cutter Block & Blade Set for Wire Processing Machines JW-BL05 Thumb Terminal Cutter Block & Blade Set for Wire Processing Machines JW-BL05 Thumb
Video Thumbnail

Terminal Cutter Block & Blade Set for Wire Processing Machines JW-BL05

📅 2023-01-06 👁️ 1,125
  • Model No: JW-BL05

  • Specifications

    Tool Seat Thickness: 10mm, 14mm, 15mm
    Cutter Types: Round knife, V knife, Flat knife, Butt knife, Semi-circle butt knife
    Wire Compatibility: 2.0-14mm outer diameter
    Cutter Seat Styles: U-shaped, V-shaped, OTP, 806, 2000 type
    Blade Core Dimensions: 9*8mm, 10*10mm
    Trough Depth: 7.6mm
    Material Belt Cutting: With/without cutting options
  • Inquiry now

JW-BL05 is a terminal cutter block and blade set: the seat that holds the cutting blade, the blade itself, and the trough that guides the wire into the cut. It is fitted to terminal machines and wire processing stations where the blade has to be positioned and depth-set rather than simply clamped.

The seat comes in 10 mm, 14 mm and 15 mm thickness, with the blade core at 9 x 8 mm or 10 x 10 mm, so the block matches the holder on the machine. Trough depth is 7.6 mm and takes wire from 2.0 to 14 mm outer diameter. The same seat accepts round, V, flat, butt and semi-circle butt knives, which is what allows one block to cover stripping, square cutting and half-round cutting. Seat styles are U-shaped, V-shaped, OTP, 806 and 2000 type, each offered with or without material belt cutting.

It is bought when a seat is worn at the trough, when a machine is set up for a new wire range, or when the holder type changes. The photo shows the OTP and 806 seats in standard and thickened form, with the belt-cutting and non-belt-cutting versions side by side.

Key Features

1. Seat thickness: 10 mm, 14 mm and 15 mm, to match different terminal machine holders.

2. Blade core: 9 x 8 mm and 10 x 10 mm sections, so the blade fits the existing seat bore.

3. Trough depth: 7.6 mm, sized for wire from 2.0 to 14 mm outer diameter.

4. Knife options: round, V, flat, butt and semi-circle butt knives in the same seat.

5. Seat styles: U-shaped, V-shaped, OTP, 806 and 2000 type, in standard and thickened bodies.

6. Material belt: available with or without the belt cutting function, selected at order.

Technical Specifications

ParameterSpecification
ModelJW-BL05
ItemCutter block and blade set
Seat thickness10 mm, 14 mm, 15 mm
Blade core9 x 8 mm, 10 x 10 mm
Trough depth7.6 mm
Wire compatibility2.0-14 mm outer diameter
Cutter typesRound knife, V knife, flat knife, butt knife, semi-circle butt knife
Seat stylesU-shaped, V-shaped, OTP, 806, 2000 type
Material belt cuttingWith or without

Applications

— Terminal machines with OTP or U/V seats - cutting and stripping where blade depth is set by the block.

— 806 and 2000 type stations, in the belt-cutting and non-belt-cutting versions.

— Wire processing lines covering 2.0 to 14 mm outer diameter, where one seat takes the full range.

— Replacement of seats worn at the trough, which shows as an inconsistent strip depth.

— Setup for a new wire range or holder type, where seat, knife and trough are changed together.

Cutter blocks: five-line, U-shaped and V-shaped large cutter seats in polished steelCutter cores: five-line, U-shaped and V-shaped versions standing upright with cutting edgesThree advantages of SKD11 cutter seats: imported steel, vacuum quenching, factory-direct priceOTP cutter seats with springs, one cutting the strap and one leaving it uncutOTP, 806 and 2000-type cutter holders, thickened versions with and without strip cuttingOTP and 2000-type cutter cores, cut-tape and no-cut versions side by sideU-shaped thickened cutter seat beside the stripping machine cutter seatFive-line and U-shaped cutter seats shown from front, side and backFive-line, U and V cutter cores with springs, front side back viewsOTP cutter seat front, side and back, 10 mm seat with 9x8 coreThickened OTP cutter holder, 14 mm seat, 10x10 core, 7.6 mm trough depth806 cutter seat without tape cutting and 2000-type cutter seat cutting the stripOTP cutter cores, cut and non-cut versions, plus 2000-type core with springU-shaped thickened holder and stripper machine cutter seat from three angles
Terminal Cutter Block & Blade
Terminal Cutter Block & Blade
Terminal Cutter Block & Blade
Terminal Cutter Block & Blade
Terminal Cutter Block & Blade
Terminal Cutter Block & Blade
Terminal Cutter Block & Blade
Terminal Cutter Block & Blade

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each