Automatic Crystal Head Crimping Machine for CAT6A WPM-CAT6A
Automatic Crystal Head Crimping Machine for CAT6A WPM-CAT6A Thumb Automatic Crystal Head Crimping Machine for CAT6A WPM-CAT6A Thumb
Video Thumbnail

Automatic Crystal Head Crimping Machine for CAT6A WPM-CAT6A

📅 2026-05-14 👁️ 1,017
  • Model No: WPM-CAT6A

  • Specifications

    Model Number: WPM-CAT6A
    Control System: PLC programmable with touch-screen interface
    Drive System: Four high-precision servo motors with linear modules
    Applicable Components: Long-body two-piece crystal head, single-row plug-hole small bracket, claw-hook type sheath
    Process: No injection molding required
    Automation: Automated pressure penetration for consistency
    User Level: Zero-experience operator capable
  • Inquiry now

The WPM-CAT6A is an automatic crystal head crimping machine built for sheathed CAT6A network cable assemblies. It feeds wire and jacket, cuts, threads the two-piece plug body, crimps, and returns the finished lead without an operator touching the connector. Patch cord plants use it to replace the four to six skilled threading hands a manual line needs.

Key Features

  • Nine-step automatic cycle — wire feed, jacket feed, cut, re-feed, clamping, body threading, jacket threading, crimping and retrieval run in one pass.
  • Four servo axes — separate high-precision servo motors with linear modules drive wire feeding, jacket feeding, insertion and crimping.
  • Seven-second cycle — one complete two-piece crystal head with jacket is crimped every 7 seconds.
  • PLC touch screen — parameters are set on the HMI, which also reports fault, feeding, air pressure, safety and hand protection alarms.
  • No injection molding — the head accepts long-body two-piece plugs, single-row hole-blocking brackets and claw-hook jackets.
  • Pressure penetration crimp — depth is applied by the machine rather than by feel, so termination quality stays constant across shifts.
  • Bracket clamping — a small bracket closes on the wire before insertion, so strands cannot splay back under the plug body.

Technical Specifications

ModelWPM-CAT6A (DS series)
External dimensions (L × W × H)Approx. 1600 × 1060 × 1250 mm
WeightApprox. 360 kg
Power requirementAC220V, 2000 W
Electrical controlPLC with touch-screen HMI
Main drivesServo motor modules: wire feed, jacket feed, wire insertion, crimping
MonitoringFault alarm, feeding alarm, air pressure alarm, safety protection, hand protection alarm
Operating efficiency7 seconds per crystal head (two-piece with jacket)
Warranty1 year, excluding consumables and abnormal use damage

Applications

  • CAT6A and CAT6 patch cords with sheathed two-piece plugs
  • Network leads for data centers and structured cabling projects
  • Custom-length Ethernet assemblies with jacket over the connector
  • OEM patch cord runs where crimp height must be identical on every piece

WPM-CAT6A automatic crystal head crimping machine with two-piece plug and jacket feed stations

Crimp and threading stations on the WPM-CAT6A CAT6A patch cord crimping machine

Why Choose This Model

The one-year warranty covers the machine itself, while consumables and damage from abnormal use are excluded, which is why plug and jacket samples are checked before an order is released. Because no injection molding is needed for the jacket, tooling cost per connector style stays low. The 7-second cycle and 2000 W single-phase supply let a line be planned without three-phase power. Because plug and jacket are fed in the same cycle, a change of connector length is a parameter entry rather than a new build.

Auto Crystal Head Crimping Machine WPM-CAT6A

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each