The WPM-RT-82T coils and binds finished AC, DC and USB cable. It accepts cable up to 10 m and 12 mm diameter, winds at 150-300 mm spacing, binds to a diameter of 45 mm and runs at 1000 pcs/h. Head length is 0-130 mm and the tail can be left at any length above zero.
Coiling and tying are the last two steps before packing, and the ones most often left to hand: the coil diameter varies, the tie sits at a different point on each bundle, and a tail that should stay free ends up inside the tie. The 82T sets spacing, binding diameter and head length, and leaves the tail free by setting. One operator loads and unloads; the coil and the tie are formed by the machine.
It does not cut. That is the difference from the meter-cut coilers in this group: the 82T is a packing-line unit placed after a cutter, and it accepts the widest cable of the coiling machines at 12 mm, with the largest binding diameter at 45 mm and the longest winding spacing at 150-300 mm. Cut-and-tie units here are built around thinner cable or smaller coils, so the two stages stay separate for this class of cable.
Key Features
1. Coil and bind only: placed after an existing cutter, so the cutting stage is not bought twice.
2. Up to 10 m and 12 mm diameter: the widest cable accepted by the coiling units in this range.
3. Winding spacing 150-300 mm: long coils for cable that should not be bent tightly.
4. Binding diameter ≤45 mm with head 0-130 mm and a free tail, so tie position and tail length are both set.
5. 1000 pcs/h: sustained rate with the coil formed and bound on the indexing table.
6. Tape core ≤7.5 kg/roll, 0.55-0.65 MPa air, ≤2800 W, 1040 x 720 x 1540 mm, 230 kg.
Technical Specifications
| Parameter | Specification |
|---|
| Model Number | WPM-RT-82T |
|---|
| Applicable Cable Types | AC / DC / USB |
|---|
| Max Line Length | ≤10 m |
|---|
| Max Wire Diameter | ≤φ12 mm |
|---|
| Winding Spacing | 150-300 mm |
|---|
| Binding Diameter | ≤45 mm |
|---|
| Head Length | 0-130 mm |
|---|
| Tail Length | >0 mm |
|---|
| Production Efficiency | 1000 pcs/h |
|---|
| Operating Pressure | 0.55-0.65 MPa |
|---|
| Tie Tape Weight | ≤7.5 kg/roll |
|---|
| Voltage | 220 V 50 Hz |
|---|
| Power | ≤2800 W |
|---|
| Machine Dimensions | 1040 L x 720 W x 1540 H mm |
|---|
| Machine Weight | 230 kg |
|---|
Applications
— AC/DC adapter leads: finished cords coiled at 150-300 mm spacing and bound for retail boxes.
— USB cable packing: 1-3 m cables coiled and tied with the connector tail left free.
— Power supply cords: output of a separate cutter fed straight into coiling and binding.
— Small appliance cord sets: 5-10 m leads coiled in a large loop for carton packing.
— OEM cable finishing: coiling and tying as the last station before labelling and boxing.