Automatic Ferrule Stripping and Crimping Machine with Twisting Function JW-0.3-16MM2
Automatic Ferrule Stripping and Crimping Machine with Twisting Function JW-0.3-16MM2 Thumb Automatic Ferrule Stripping and Crimping Machine with Twisting Function JW-0.3-16MM2 Thumb
Video Thumbnail

Automatic Ferrule Stripping and Crimping Machine with Twisting Function JW-0.3-16MM2

📅 2026-06-28 👁️ 2,392
  • Model No: JW-0.3-16MM2

  • Specifications

    Automatic Ferrule Stripping and Crimping Machine with Twisting Function JW-0.3-16mm2
    Model: JW-0.3-16mm2
    Control Mode:Human-machine interface, electronic control, pneumatic control
    Wire Size:0.3-16mm² (
    Tube Size:Insulator length
    Stripping Length:6-30mm
    Production Capacity:3.2s / wire
    Air Supply:0.5-0.6MPa
    Power Source:AC220V / 110V / 50 / 60Hz
    Weight 62kg
    Dimensions:W360mm × L520mm × H425mm
  • Inquiry now

The JW-0.3-16MM2 is an automatic ferrule stripping and crimping machine that strips, twists, and crimps loose tubular terminals onto cable in one cycle. It accepts wire from 0.3 to 16 mm², strips 6–30 mm, and completes a wire every 3.2 seconds. Panel builders and appliance harness lines use it to replace separate strippers, twisters, and bench crimpers with one station.

Key Features

  • Twisting Before Crimping — the twist head consolidates stranded conductors so no strand escapes the ferrule barrel.
  • Four-Sided Universal Mold — one built-in die set covers wire below 4.0 mm² with no die change between terminal sizes.
  • LCD Touch Control — stripping depth, stripping length, and crimping height are set on screen and recalled per job.
  • Vibratory Bowl Feeding — terminals load from a vibrating plate, making size changes fast and hands-free.
  • Sealed, Stable Cycle — the closed working area keeps hands away from the crimp zone, and pneumatic actuation holds crimp height constant while line pressure stays between 0.5 and 0.6 MPa.
  • Terminal Size Flexibility — small ferrules and 16 mm² barrel terminals run through the same bowl and the same die head.
  • Wide Insulation Coverage — PVC, Teflon, silicone, and glass fiber wire all strip cleanly.

Technical Specifications

ModelJW-0.3-16MM2
Control ModeHuman-machine interface, electronic control, pneumatic control
Wire Size0.3–16 mm²
Tube SizeMatched to insulator length
Stripping Length6–30 mm
Production Capacity3.2 s per wire
Air Supply0.5–0.6 MPa
Power SourceAC 220 V / 110 V, 50/60 Hz
DimensionsW 360 × L 520 × H 425 mm
Weight62 kg

Applications

  • Electronics and appliance harness assembly with pre-insulated ferrules.
  • Motor, transformer, and pump lead termination.
  • Lighting and toy manufacturing lines.
  • Control panel and distribution board wiring.

Why Choose This Model

A single machine replaces three bench operations, which usually removes one handling step and one operator from each cell. The 62 kg frame runs on 110 V or 220 V and needs only 0.5–0.6 MPa of shop air. Changeover between terminal sizes takes seconds because the four-sided mold stays in the head, which keeps short mixed batches economical. Terminal nests and twist blades are supplied as spares, and our engineers set the stripping and crimping programs against your terminal samples before dispatch.

Automatic Ferrule Stripping and Crimping Machine with Twisting Function JW-0.3-16MM2
Automatic Ferrule Stripping and Crimping Machine with Twisting Function JW-0.3-16MM2

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each