WPM-F003 Cable Prefeeder - 750W Variable Speed Wire Processing
WPM-F003 Cable Prefeeder - 750W Variable Speed Wire Processing Thumb
Video Thumbnail

WPM-F003 Cable Prefeeder - 750W Variable Speed Wire Processing

📅 2025-03-15 👁️ 2,062
  • Model No: WPM-F003

  • Specifications

    Model: WPM-F003
    Power: 220V
    Motor: 750W
    Loading Capacity: 50kg
    Dimension: 1000*600*1000mm
  • Inquiry now

The WPM-F003 is a floor-standing cable prefeeding machine for reels up to 50 kg. A 750 W motor on 220 V drives the reel table, and the unit stands on a 1000×600×1000 mm frame with castors so it can be positioned directly behind a cut-and-strip machine.

The drive is matched to the consumption rate of the downstream machine through a dancer column rather than run at a fixed speed. A sliding carriage on the column takes up the loop as the cutter draws wire and releases it when the cutter pauses, so the reel accelerates and stops with demand instead of pushing slack forward. The 750 W motor supplies enough breakaway torque to start a full 50 kg reel without slipping on the table, which a small pay-off motor cannot do.

The WPM-F001 uses the same 750 W drive but is rated 60 kg. The WPM-C002 carries 20 kg through a 120 W front motor and a 180 W rear motor over ten speed levels, and the tabletop WPM-02 stops at 14 kg. The F003 is the 50 kg floor unit between them.

Key Features

1. 50 kg reel capacity on a motor-driven table, with 750 W of drive torque for breakaway on a full reel.

2. Dancer column with a sliding carriage and guide rollers that absorbs the loop as the cutter starts and stops.

3. 220 V supply with a start/stop control box and emergency stop on the column face.

4. 1000×600×1000 mm frame on castors, positioned behind an existing cutting line without a fixed install.

5. Horizontal reel table with a locking spindle, so the reel turns with the table rather than dragging on a static barrel.

6. Sized to run continuously as the upstream unit of a cut-and-strip or crimping line.

Technical Specifications

ParameterSpecification
ModelWPM-F003
Machine typeCable prefeeding / pay-off machine
Motor750 W
Power supply220 V
Loading capacity50 kg
Loop controlDancer column with sliding carriage
Dimensions1000×600×1000 mm

Applications

— Upstream pay-off for automatic cut-and-strip machines running 50 kg reels

— Wire harness lines feeding several cutting stations from one reel position

— Building wire and panel wire processing: continuous feed into a measuring and cutting head

— Automotive harness pre-production: paying off primary wire to an in-line crimping station

— Cable assembly cells running long lengths where a static spool would tighten and pull short

Variable Speed Cable Prefeeder

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each