Automatic Nylon Cable Tie Machine for Motor Stator Binding WPM-25100M
Automatic Nylon Cable Tie Machine for Motor Stator Binding WPM-25100M Thumb Automatic Nylon Cable Tie Machine for Motor Stator Binding WPM-25100M Thumb
Video Thumbnail

Automatic Nylon Cable Tie Machine for Motor Stator Binding WPM-25100M

📅 2026-05-17 👁️ 2,466
  • Model No: WPM-25100M

  • Specifications

    Nylon Cable Tie Machine for Motor Stator Binding WPM-25100M
    Control System: PLC
    Operation Type: Automatic
    Tying Capacity: 6-8 cable ties simultaneously
    Application: Motor stator coil binding
    Fixture Requirement: No change needed for various motors
    Operation Method: Pedal-controlled automatic cycle
    Labor Saving: 3 operators per device
  • Inquiry now

The WPM-25100M ties motor stator coils with nylon cable ties, six to eight ties in one automatic cycle. The frame carries its own vibratory tie bowl, control box and tying head, and the head is fixed to a separate bench plate that the stator is presented to.

Hand binding a stator means one tie at a time, a tension that changes between operators, and tails that have to be trimmed in a second pass. On the 25100M the ties are oriented in the bowl, fed along a track to the head, and tensioned and cut by the machine under PLC control. The operator holds the stator under the head and starts the cycle with a foot pedal, so both hands stay on the workpiece, and the fixed head keeps the tie line square to the coil ends.

The machine is not a strapping tool. The WPM-A19/A25 and WPM-L300 tension PET or PP band around cartons and bundles, while the 25100M places discrete nylon ties around stator coils and trims the tail in the same cycle. Against a hand tying gun the difference is the count: one cycle places six to eight ties, and the specification puts the labour equivalent at three operators per machine.

Key Features

1. Six to eight cable ties placed in one automatic cycle, at a pitch set by the head rather than by the operator's eye.

2. Vibratory stainless bowl with an orienting track separates and aligns the ties before they reach the head, so the head is not hand-loaded.

3. PLC control with an LCD panel and key switch: the operator starts the cycle and the program is held under the key.

4. Foot pedal cycle start leaves both hands free to hold and index the stator between ties.

5. No fixture change between motor sizes; the stator is presented to the head directly, which removes the jig changeover that hand binding lines need for each frame size.

6. Bowl, control box and tying head on one mobile frame with castors, so the station can be moved to the winding line and back.

Technical Specifications

ParameterSpecification
ModelWPM-25100M
Machine typeAutomatic nylon cable tie machine for motor stator binding
Control systemPLC
Operation typeAutomatic
Tying capacity6-8 cable ties simultaneously
ApplicationMotor stator coil binding
Fixture requirementNo change needed for various motors
Operation methodPedal-controlled automatic cycle
Labour equivalent3 operators per machine

Applications

— Pump and fan motor stators: coil end binding with nylon ties before varnish and assembly.

— Power tool motors: stator and field coil binding on small frame sizes.

— Compressor and HVAC fan motors: coil bundle tying at the end of the winding station.

— E-bike and hub motor stators: multi-point tie binding around the lamination stack.

— Household appliance motors: mixer, blender and extractor stators tied at fixed pitch.

Stator nylon cable tie machine with vibratory bowl and tied stator insetStator nylon cable tie machine with blue base and gun head on standFeatures page with machine photo and seven numbered benefitsParameter table for WPM-25100M: 220V, 0.8s per piece, 150kgWhite and blue stator tying machine, side view with gun on platformMotor stators tied with white nylon cable ties in various sizesPure copper motor graphic and vibration plate feeding nylon tiesCable tie gun head platform, PLC touch screen and switch panelMachine in workshop with vibratory bowl and control panelMachine angled view on casters showing bowl and gun head
Motor Stator Nylon Cable Tie Machine

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each