The WPM-200T is a pneumatic wire stripping and twisting machine for strip and twist lengths of 3–45 mm, with a minimum wire length of 5 mm. It runs on 220 V/50 Hz at 30 W with a 6 kgf air source, and weighs 12 kg at 320 × 180 × 170 mm.
On power line and multicore cable, stripping and twisting are usually two stations, and the wire is handled twice before it reaches the terminal. The WPM-200T does both in one cycle: the vertical pneumatic slide at the front closes the blade on the jacket to the set length, and the rotary jaw head in the drum grips the exposed strands and twists them while the sleeve is pulled clear. Because the twist is formed by the head and not by hand, strand count and twist tightness stay the same across a batch, and no strands are left standing outside the twist.
Against the WPM-180 portable stripper, the 200T covers a longer working range: 3–45 mm strip and twist against 2–20 mm, and it accepts power line and multicore cable against the 180's 1–4 mm limit. The 200T is air-driven at 6 kgf and weighs 12 kg, twice the 180, which suits a fixed bench position rather than movement between panels.
Key Features
1. 3–45 mm strip and twist length in one cycle, with a minimum wire length of 5 mm for the clamping jaws.
2. Rotary jaw head grips the exposed strands and twists them while the sleeve is drawn off, so no strands stand outside the twist.
3. 6 kgf air source driving the vertical blade slide at the front of the frame; 220 V/50 Hz, 30 W for the rotary head.
4. Handles power line, electronic wire and multicore wire, with the blade depth set to the jacket rather than the conductor.
5. 320 × 180 × 170 mm housing at 12 kg with rubber feet, sized for a fixed position at the end of a harness bench.
6. Green cycle button and red power switch on the side panel, with the rotary jaws visible at the drum mouth for wire entry.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-200T |
|---|
| Machine type | Pneumatic wire stripping and twisting machine |
|---|
| Strip and twist length | 3–45 mm |
|---|
| Air source | 6 kgf |
|---|
| Power supply | 220 V (50 Hz) |
|---|
| Power | 30 W |
|---|
| Min. wire length | > 5 mm |
|---|
| Dimensions | 320 × 180 × 170 mm |
|---|
| Weight | 12 kg |
|---|
Applications
— Power cord assembly: 0.75–2.5 mm² mains leads stripped 3–45 mm and twisted before plug and connector wiring.
— Harness benches: multicore cable ends twisted to a fixed strand pattern for terminal block insertion.
— Electronic wire preparation: 3–6 mm strip and twist on appliance internal wiring at one station.
— Lighting and driver leads: stranded output wire twisted for push-in connectors and ferrules.
— Contract assembly: batches where strip and twist consistency is checked by strand count at the terminal.