JW-AP09 (NA-20S) is a European-style pneumatic crimping applicator for side-feed loose terminals, including the wide and ultra-wide special terminals that a standard OTP die cannot span. It mounts on OTP terminal crimping machines and takes OTP-pattern terminal dies.
The crimp is closed by a pneumatic cylinder carried on the body rather than by the press ram, and the air lines run to the rear, so the strip enters from the side and the front of the crimp zone stays open. The transverse die layout makes the body deeper than a standard applicator, and the mounting footprint extends behind the bed, which has to be checked against the adjacent station.
It is used where a press already carries an OTP die set and a wide terminal has to be run without moving the job to a dedicated machine: the applicator is bolted to the bed, the air supply is connected, and the crimp height is set on the die. It also serves as the replacement unit when an existing NA-20S applicator is worn.
Key Features
1. Side-feed loose-terminal configuration, with the terminal presented from the side of the crimp zone rather than indexed on a carrier strip
2. Pneumatic crimping head driven by a cylinder on the body, with the air lines taken to the rear and the front of the die left clear
3. Transverse die layout sized for wide and ultra-wide special terminals, with the crimp closing across the barrel
4. OTP die interface, so a terminal-specific die can be changed without replacing the applicator body
5. Bolted guide and stop plates on the feed track, reset for terminal length after a die change
6. Base plate bolted to the OTP bed, so changeover is a die and track reset followed by a test crimp
Technical Specifications
| Parameter | Specification |
|---|
| Model | JW-AP09 |
|---|
| Model number on die | NA-20S |
|---|
| Type | European pneumatic crimping applicator |
|---|
| Feed type | Side feed |
|---|
| Terminal type | Loose terminals |
|---|
| Die interface | OTP terminal crimping machine dies |
|---|
| Mechanism | Pneumatic transverse die |
|---|
| Machine fit | OTP terminal crimping machines |
|---|
Applications
— OTP terminal crimping machines running wide loose terminals that exceed the span of a standard die
— Pneumatic applicator stations crimping side-feed loose terminals in harness assembly
— Replacement of a worn NA-20S applicator on an existing OTP bed, reusing the air supply and mounting
— Low-volume runs of special terminals, where one applicator body carries several terminal dies
— Crimp height trials on wide terminals before a die is released to production