The WPM-85-40 closes a coreless plastic tie around a folded cable bundle. The tie material has no iron core, so the tie is soft along its whole length and is drawn from the reel at the side of the head rather than fed as a rigid strap. Tie length is 85-140 mm and the bundle range is 5-25 mm, with the number of loops set from 2 to 6 on the PLC. The cables it is specified for are the small ones that show a mark easily: USB, HDMI and light power leads.
A PE iron-core tie holds its shape because of the wire inside it, and that wire is what sits against the jacket at the closing point. On a thin USB or HDMI jacket the core can leave a crease that stays after the tie is removed, which is a return reason on retail cable. A coreless tie has no hard core, so the closing force is spread over the soft tie and the bundle is closed without a wire edge against the cable. The machine is set once for tie length and loop count, and the head repeats it.
The WPM-18-45 is the iron-core alternative in the group, binding 18-45 mm with a 120-200 mm tie, and the WPM-5-30 is the larger automatic coiler. The WPM-85-40 is the small-bundle unit: 5-25 mm, 85-140 mm tie, 2-6 loops, 80 W. Where the 18-45 covers harness bundles and power cords, this one is aimed at single data cables that are folded and tied for a retail box, and the coreless tie is the reason it is chosen over the iron-core head.
Key Features
1. Bundle diameter 5-25 mm, which suits single USB, HDMI and light power leads rather than harness bundles.
2. Tie length 85-140 mm cut to the set length at the head.
3. Coreless plastic tie with no iron core, so no wire edge is pressed into the jacket at the closing point.
4. Loop count 2-6, set on the PLC, so the folded bundle matches the box it is packed in.
5. PLC control with a touchscreen on the cabinet and a pneumatic head at the front for the closing stroke.
6. 80 W on AC 220 V, 50/60 Hz, on a bench cabinet small enough to sit beside a packing table.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-85-40 |
|---|
| Power supply voltage | AC 220 V |
|---|
| Power frequency | 50 Hz / 60 Hz |
|---|
| Rated power | 80 W |
|---|
| Tie wire length | 85-140 mm |
|---|
| Bundle diameter range | Φ5-25 mm |
|---|
| Coil settings | 2-6 loops, adjustable |
|---|
| Cable tie type | Coreless plastic tie, no iron core |
|---|
Applications
— USB cable packing: the lead is folded into 2-6 loops and tied before it goes into a retail carton.
— HDMI and display cable assembly: thin jackets tied with a coreless tie so the outer jacket is not creased.
— Consumer electronics accessory lines: short charging and sync leads tied at the packing table.
— Audio and small power leads: light cables bundled at the 5-25 mm range where an iron-core head is too large.
— Cable trading: loose data cables re-bundled into fixed loop counts for resale lots.