Automatic Wire Stripping Cutting Coiling Binding Machine WPM-SCCB
Automatic Wire Stripping Cutting Coiling Binding Machine WPM-SCCB Thumb Automatic Wire Stripping Cutting Coiling Binding Machine WPM-SCCB Thumb
Video Thumbnail

Automatic Wire Stripping Cutting Coiling Binding Machine WPM-SCCB

📅 2026-05-14 👁️ 482
  • Model No: WPM-SCCB

  • Specifications

    Model Number: WPM-SCCB
    Winding Distance: 70-180mm (wire) / 140-220mm (pipe)
    Cutting Line Precision: 60mm
    Tie Diameter:
    Head Length: 40-130mm
    Suitable Belt: Rubber core
    Length of Cut: 3-30m
    Winding Appearance: Circle double-type
    Theoretical Output: ≤700pcs/H
  • Inquiry now

The WPM-SCCB performs four operations in one cycle: it strips the cable end, cuts to length, winds the coil on an indexing turntable and closes it with a twist tie at the binding station.

A separate stripper and coiler force the stripped cable to be bundled, carried across the floor and re-registered at the coiler, and each transfer bends the prepared conductor. On the SCCB the cable stays in one gripper path from strip to tie at up to 700 pieces per hour, so one operator loads reels and removes finished coils.

It is the stripping member of the CRO / SCCB / HCRO / 02SL family. The CRO cuts, coils and ties only; the HCRO handles heavier cable without a stripping station; the 02SL strips both head and tail and ties down to a 20 mm diameter.

Key Features

1. Four stations in one cycle: stripping, cutting, coiling and binding, sequenced on an indexing turntable.

2. The stripping unit prepares the cable end before the coil is formed, so the tied coil leaves with a stripped lead.

3. Up to 700 coils per hour over the same 3-30 m cut range as the CRO.

4. Winding distance 70-180 mm for wire and 140-220 mm for pipe, with a tie diameter under 50 mm.

5. Japanese SMC cylinders and Taiwan pneumatic components on the strip, clamp and tie actuators.

6. Turntable fixtures hold the loop through winding and tying, so the coil keeps its shape until it is released.

Technical Specifications

ParameterSpecification
ModelWPM-SCCB
FunctionStripping, cutting, coiling, binding
Stripping unitFitted
Cut length3-30 m
Winding distance70-180 mm (wire) / 140-220 mm (pipe)
Tie diameter< 50 mm
Head length40-130 mm
Cutting length precision60 mm
Winding appearanceCircular double loop
Feed beltRubber core
PneumaticsJapanese SMC cylinders, Taiwan pneumatic components
OutputUp to 700 pcs/h

Applications

— USB and DC cable assemblies: stripped, coiled and bound before connector soldering.

— Power adapters and chargers: a stripped lead end on a tied coil ready for packing.

— Harness subcontractors: batches of stripped and tied coils for kitting.

— Small appliance leads: prepared ends and tied coils fed to final assembly.

— Cable processors: strip-coil-tie runs replacing two separate workstations.

Wire Strip Cut Coil Bind Machine WPM-SCCB

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each