Fully Automatic 2P Parallel Wire Dip Tin & Insert Plug Machine JW-CM06
Fully Automatic 2P Parallel Wire Dip Tin & Insert Plug Machine JW-CM06 Thumb Fully Automatic 2P Parallel Wire Dip Tin & Insert Plug Machine JW-CM06 Thumb
Video Thumbnail

Fully Automatic 2P Parallel Wire Dip Tin & Insert Plug Machine JW-CM06

📅 2026-05-17 👁️ 2,199
  • Model No: JW-CM06

  • Specifications

    Fully Automatic 2P Parallel Wire Dip Tin & Insert Plug Machine
    Processing Functions: Cutting, stripping, tinning, crimping, shell insertion
    Wire Length Range: 25mm-450mm
    Terminal Compatibility: 1.25, 2.0, 2.5 terminals
    Monitoring Systems: Pressure monitoring, CCD vision system, CPK value system
    Features: Automatic feeding, defective product filtering, pull-out force analysis, modular structure
    Output: Automatic good/bad product classification and counting
  • Inquiry now

The JW-CM06 works 2P parallel wire from one end to the other in a single cycle: the pair is cut to length, stripped, both conductors dip-tinned at one end, then terminals are crimped on the opposite end and the pair is pushed into a 2P shell. The two conductors stay at a fixed pitch from the feed rollers to the insertion station, which is the part hand assembly cannot hold.

Split across equipment, the job needs a tinning pot, a crimping press and a bench fixture for the shell, with the wire counted and handled between each step. Here one operator loads the reel and unloads classified parts. Pressure monitoring, a CCD vision check and CPK tracking run on every cycle, defective pieces are ejected rather than packed, and pull-out force is analysed at set-up so the crimp height is proven before the batch runs.

The JW-CM06 is the 2P specialist of the group: a 25-450 mm length window, 1.25, 2.0 and 2.5 terminals, and the only model here carrying CCD, pressure and CPK monitoring on the same machine. The WPM-DPW12 goes wider on shells, 2P to 12P, without that instrumentation; the WPM-5505 inserts housings at 530-650 times per hour on 32-18 AWG. Where the harness is a two-core lead with a tinned supply end and a 2P plug, the CM06 is the closest fit.

Key Features

1. Cut, strip, dip-tin, crimp and 2P shell insertion in one cycle, one end tinned and the opposite end assembled with terminals

2. Dedicated 2P parallel wire handling, both conductors held at fixed pitch through insertion

3. Terminal sizes 1.25, 2.0 and 2.5

4. Wire length range 25-450 mm

5. Pressure monitoring, CCD vision system and CPK value tracking on each cycle

6. Defective-product ejection, good and bad counting, pull-out force analysis; modular station structure

Technical Specifications

ParameterSpecification
ModelJW-CM06
Processing FunctionsCutting, stripping, tinning, crimping, shell insertion
Wire Type2P parallel wire
Wire Length Range25-450 mm
Terminal Compatibility1.25 / 2.0 / 2.5
MonitoringPressure monitoring, CCD vision system, CPK value system
Quality ControlDefective product filtering, pull-out force analysis, good/bad counting
StructureModular, automatic feeding

Applications

— Appliance and power tool two-core cords: 2P parallel wire, tinned at the supply end, 2P shell at the board end

— LED drivers and small power supplies: 1.25 and 2.0 terminals into 2P white shells

— Battery chargers and adapters: short 25-450 mm two-core leads

— Fan, sensor and switch looms: two-core zip cord with a tinned free end

JW-CM06 automatic 2P parallel wire tinning and plug machine overview with conveyorJW-CM06 two-person shell machine with wire spool pay-offs and green conveyorFeature description text for the JW-CM06 tinning, crimping and housing machineJW-CM06 parameter table: AWG18-32, 25-450mm length and 7000-8000 terminals per hourJW-CM06 labelled build: touch screen control, vibration plate feeding and automatic sortingSample display: 2P red and black wire pairs with white plug housings and tinned endsJW-CM06 details: seven-roller wire straightener, vibration feeder bowl and copper motorJW-CM06 details: conveyor, precision crimping station, feeding controller and circuit cabinetJW-CM06 full machine with safety enclosure, monitor and two wire spoolsJW-CM06 left side with touch panel, wire spools and output conveyorJW-CM06 three-quarter view with enclosed crimping head and green take-away beltJW-CM06 rear view of enclosure with electrical cabinet, air filter and castors
Auto 2P Parallel Wire Dip Tin Machine

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each