The WPM-9935 is an automatic coaxial cable stripping and cutting machine built as a floor-standing cabinet. It handles 3–32 mm cable, opens up to six layers and cuts from 1 mm to 10 m from the reel, with 50 m available as a custom build. Left-end stripping reaches 200 mm, right-end stripping 250 mm, and the four high-speed steel blades are driven by a 1200 W motor on AC220V 50/60 Hz.
The cabinet carries two rotary heads, one at each end of the working area, so both cable ends are stripped in the same cycle instead of a second pass after a flip. Cable is pulled from the reel, measured, cut, stripped at both ends and dropped onto the take-off tray in one run. The carriage uses a motor and ball screw drive, and the 1430 × 750 × 1300 mm frame at 320 kg keeps a 32 mm cable steady while the heads close on it.
This is the only machine in the group that combines a 32 mm bore with two stripping heads. The WPM-35120 reaches 35 mm but strips one end per manual cycle, and the WPM-9600S and 9800 cut and strip automatically but stop at 5.5 mm and 4 mm. Where the cable is charging-gun or battery sized and both ends are needed, the 9935 removes the second operation entirely.
Key Features
1. Two rotary heads strip both ends in one cycle at 350–750 pcs/h, removing the flip-and-reload step of single-head machines.
2. Left end strips to 200 mm and right end to 250 mm, long enough for a full jacket window at either end of the same cable.
3. Six stripping layers, with cutting depth set at 0.01 mm.
4. Cut length from 1 mm to 10 m per piece, with 1 mm to 50 m available on a custom configuration.
5. Four high-speed steel blades in the two heads, driven by a 1200 W motor on AC220V 50/60 Hz.
6. Motor and ball screw drive on a 1430 × 750 × 1300 mm, 320 kg cabinet, with a take-off tray that collects the finished pieces.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-9935 |
|---|
| Machine type | Automatic coaxial cable stripping and cutting machine |
|---|
| Wire diameter | 3–32 mm |
|---|
| Cut length | 1 mm–10 m (1 mm–50 m customizable) |
|---|
| Cutting depth | 0.01 mm |
|---|
| Max. stripping layers | 6 layers |
|---|
| Max. stripping capacity | Left end 200 mm, right end 250 mm |
|---|
| Working efficiency | 350–750 pcs/h |
|---|
| Blade | 4 pcs high-speed steel |
|---|
| Drive mode | Motor, ball screw drive |
|---|
| Power supply | AC220V, 50/60 Hz |
|---|
| Power rating | 1200 W |
|---|
| Dimensions | 1430 × 750 × 1300 mm |
|---|
| Weight | 320 kg |
|---|
Applications
— EV charging gun cable: 3–32 mm cable cut from the reel and stripped at both ends for the contact and gland.
— Battery pack high-voltage harness: long 200–250 mm jacket windows on both ends before lug fitting.
— Base-station and feeder cable: six-layer stripping at both ends in one cycle for connector assembly.
— Industrial power distribution cable: cut lengths up to 10 m with the jacket opened at each end.
— Cable assembly lines where both ends are terminated: the take-off tray delivers finished stripped pieces to the next station.