Automatic Wire Coiling & Tying Machine for Cable Harness WPM-81M
Automatic Wire Coiling & Tying Machine for Cable Harness WPM-81M Thumb Automatic Wire Coiling & Tying Machine for Cable Harness WPM-81M Thumb
Video Thumbnail

Automatic Wire Coiling & Tying Machine for Cable Harness WPM-81M

📅 2026-03-14 👁️ 360
  • Model No: WPM-81M3

  • Specifications

    Model Number: WPM-81M
    Finished Product Shapes: 8 shapes, single tying
    Wire/Cable Type: AC/DC/USB etc.
    Wire Outer Diameter: ≤4 mm
    Winding Part Distance: 45-80 mm
    Winding Length: ≤3 m (depending on wire size)
    Winding Speed: Adjustable
    Tying Outer Diameter: ≤20 mm
    Wirehead Length: 0-130 mm
    Wire Tail Length: >0 mm
    Productivity: 1800 pcs./h (winding length=1m, turns=3)
    Compressed Air Connection: 0.55-0.65 MPa
    Power Supply: 110, 220 V (50-60 Hz)
    Power: ≤2000 W
    Dimension: 1040*720*1540 mm
    Weight: 160 kg
  • Inquiry now

The WPM-81M3 folds AC, DC and USB cable into an 8 shape and closes each coil with a single tie. It is set for 4 mm maximum wire diameter, a 45-80 mm winding part distance and cable lengths up to 3 m, with the tie closing at 20 mm outer diameter.

On a bench a 1 m USB lead takes three folds and one tie, and the operator's loop count drifts with the batch. The 81M3 holds turn count and tie position from piece to piece and is rated at 1800 pcs/h at 1 m winding length and 3 turns; the tie is applied inside the cycle, so the operator only loads the cable ends and lifts the finished coil.

It shares the 4 mm, 3 m, 20 mm and 1800 pcs/h envelope with the 40XL, so the choice between them is platform rather than throughput: the 81M3 sits on the 81 frame with an HMI panel and enclosed cabinet doors and runs the same spares as the 81M and 82M, while the 40XL is the standalone 40-series unit. For 6.2 mm cable step up to the 81M, for 10 mm to the 82M.

Key Features

1. 8-shape single-tie winding for small-gauge AC, DC and USB cable.

2. Coil width of 45-80 mm, matched to 0.5-3 m consumer leads.

3. Wire range up to 4 mm OD, covering USB, charging and small power cords.

4. Single tie at 20 mm maximum outer diameter, with wirehead length 0-130 mm adjustable.

5. Rated 1800 pcs/h at 1 m winding length and 3 turns.

6. HMI panel and enclosed cabinet on the 81 frame; 0.55-0.65 MPa air, 110/220 V, power under 2000 W, 160 kg.

Technical Specifications

ParameterSpecification
Model NumberWPM-81M3
Finished Product Shapes8 shapes, single tying
Wire / Cable TypeAC / DC / USB, etc.
Wire Outer Diameter≤ 4 mm
Winding Part Distance45 - 80 mm
Winding Length≤ 3 m (depending on wire size)
Winding SpeedAdjustable
Tying Outer Diameter≤ 20 mm
Wirehead Length0 - 130 mm
Wire Tail Length> 0 mm
Productivity1800 pcs/h (winding length 1 m, 3 turns)
Compressed Air Connection0.55 - 0.65 MPa
Power Supply110 / 220 V (50 - 60 Hz)
Power≤ 2000 W
Dimensions1040 x 720 x 1540 mm
Weight160 kg

Applications

— Cable harness cell: USB and charging leads wound and single-tied before harness assembly.

— Power cord sets: 1-3 m cords folded to a 45-80 mm width for carton packing.

— DC adapter leads: output cables coiled to a fixed width so the plug stays clear of the tie.

— Consumer electronics OEM: 8-shape coils counted into poly bags on the same line.

— Contract assembly: small-gauge AC, DC and USB runs changed over on one head.

WPM-81M3 coiling machine with CE mark, RCA cable sample and tying unit
Upgraded Figure-8 Wire Winder WPM-81M

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each