The WPM-5505 cuts, strips, crimps and inserts a housing on one end of each lead in a single cycle, at 530-650 times per hour. The second end can be half-stripped, twisted or tinned to a 1-9 mm length, so a lead leaves the machine with a terminated and housed connector at one end and a prepared free end at the other. Wire range is 32-18 AWG, cutting length 30-800 mm, stripping 1-9 mm in half or full mode.
Inserting crimped leads into a multi-cavity housing by hand is the slow step in this class of harness, and it is where terminals back out of the housing or land in the wrong cavity. The WPM-5505 performs the insertion on the machine axis and confirms the crimp with an optional force monitor, with a CCD monitor available for cavity and orientation checks. The CE-marked cabinet, interlocked guard and stack light let one operator run the cell without a second inspection station.
In this group the WPM-5505 is the housing-insertion model with the widest wire window, 32-18 AWG against 2P-only shells on the JW-CM06 and up to 12P shells on the WPM-DPW12. Its 530-650 times per hour is the lowest rate here, a consequence of the insertion step; the WPM-SP20 reaches 22,000 pcs per hour on flat cable without housings, and the 501S runs 3,200 wires per hour without insertion. It fits where the housing, not the throughput, sets the specification.
Key Features
1. Cut, strip, single-end crimp and single-end housing insertion in one cycle
2. Opposite end selectable as half-strip, twist or tin, 1-9 mm
3. Capacity 530-650 times per hour; cutting length 30-800 mm
4. Wire range 32-18 AWG; stripping 1-9 mm, half or full
5. CE certified; optional CCD monitor and crimping force monitor
6. Air supply 0.5 MPa; 3.8 x 1.8 x 2.2 m footprint, 550 kg
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-5505 |
|---|
| Certification | CE |
|---|
| Functions | Cutting, stripping, single-end crimping, single-end housing insertion, single-end half-stripping / twisting / tinning |
|---|
| Capacity | 530-650 times/hour |
|---|
| Cutting Length | 30-800 mm |
|---|
| Applicable Wire | 32-18 AWG |
|---|
| Stripping Length | 1-9 mm (half or full) |
|---|
| Tinning Length | 1-9 mm |
|---|
| Air Pressure | 0.5 MPa |
|---|
| Dimensions | 3.8 x 1.8 x 2.2 m |
|---|
| Weight | 550 kg |
|---|
| Optional | CCD monitor, crimping force monitor |
|---|
Applications
— Home appliance controller harnesses: 32-18 AWG with a multi-cavity nylon housing one end and a tinned end the other
— Power tool and garden equipment leads: single-end housing insertion, twisted free end
— HVAC and pump control looms: 30-800 mm leads into pluggable housings
— Lighting and driver leads: tinned free end, housed connector at the board end