Semi-Automatic Wire Coiling & Binding Machine WPM-212A
Semi-Automatic Wire Coiling & Binding Machine WPM-212A Thumb Semi-Automatic Wire Coiling & Binding Machine WPM-212A Thumb
Video Thumbnail

Semi-Automatic Wire Coiling & Binding Machine WPM-212A

📅 2026-05-14 👁️ 1,164
  • Model No: WPM-212A

  • Specifications

    Model Number: WPM-212A
    Operation Type: Semi-Automatic
    Control System: PLC or Controller with Touch Screen
    Compatible Wires: AC cable, DC cable, data wire, cable, other electric wires, twisted bundles
    Wire Head Configuration: One side or two sides
    Production Monitoring: Real-time quantity display, carton quantity setting with automatic alert/shutdown
    Safety Features: Operator warning system for malfunctions
  • Inquiry now

The WPM-212A coils a cable and closes a twist tie on it, with a binding range of 5-30 mm as marked on the machine. It is a semi-automatic unit: the operator presents the lead to the winding wheel and the machine forms the coil and closes the tie at the head. The wire head is supplied in a one-side or two-side configuration, which decides whether one end or both ends of the lead are presented to the head. It runs AC cable, DC cable, data wire and twisted bundles, so the same setting covers a plain lead and a pair that has already been twisted together.

Manual coiling on small leads is slow because the coil is too small to hold and tie at the same time. The 212A holds the coil on the wheel while the head closes the tie, so the operator's hands are free for the next lead, and the coil size comes from the machine rather than from the fingers. Production is shown in real time on the controller, and a carton quantity is entered so the machine alerts and stops when the carton is full, which takes the count off the operator at the end of the line.

This is the narrow-tie member of the 212 family. The entry WPM-212 ties 8-30 mm with a 50-200 mm coil, the WPM-212C 18-45 mm with a 50-250 mm coil and the WPM-212L 40-80 mm with a 50-300 mm coil. The 212A closes down to 5 mm, which is where small USB and HDMI coils sit, and it is the model in the family that carries carton quantity with automatic alert and shutdown. Choose it when the coils are small and the packing count has to be controlled at the machine.

Key Features

1. Binding range 5-30 mm, the smallest in the 212 family, for compact coils of small data and power leads.

2. One-side or two-side wire head, so leads that must be presented at both ends can be run on the same machine.

3. Semi-automatic cycle: the operator loads the lead and the winding wheel and tie head complete the coil and the tie.

4. Real-time quantity display with carton quantity setting, automatic alert and shutdown when the carton is full.

5. Runs AC cable, DC cable, data wire, other electric wire and twisted bundles.

6. PLC or controller with touchscreen, plus an operator warning system for malfunctions.

Technical Specifications

ParameterSpecification
ModelWPM-212A
Operation typeSemi-automatic
Control systemPLC or controller with touch screen
Binding range5-30 mm (machine label)
Compatible wiresAC cable, DC cable, data wire, other electric wires, twisted bundles
Wire head configurationOne side or two sides
Production monitoringReal-time quantity display, carton quantity setting with automatic alert and shutdown
Safety featuresOperator warning system for malfunctions

Model Range at a Glance

All four WPM-212 models share the same semi-automatic coiling and binding platform, touch-screen control and AC 220/110 V supply. The WPM-212A coils 50–200 mm bundles and binds 5–30 mm, so it suits small to medium harness runs.

ParameterWPM-212WPM-212AWPM-212CWPM-212L
Winding range*50–200 mm50–200 mm50–250 mm50–300 mm
Binding range*8–30 mm5–30 mm18–45 mm40–80 mm
Tie length65–130 mm75–140 mm120–190 mm200–300 mm
Coil shapeRound, long, figure-8Round, long, figure-8Round, long, figure-8Round, long, figure-8
Suitable wire typesAC cable, DC cable, data cable, video cable, other wiresAC cable, DC cable, data cable, video cable, other wiresAC cable, DC cable, data cable, video cable, other wiresAC cable, DC cable, data cable, video cable, other wires
Length accuracy±(0.002 × L) mm±(0.002 × L) mm±(0.002 × L) mm±(0.002 × L) mm
Throughput66–75 cycles/min66–75 cycles/min66–75 cycles/min66–75 cycles/min
Noise level<70 dB<70 dB<70 dB<70 dB
Power supplyAC 220/110 V, 50/60 HzAC 220/110 V, 50/60 HzAC 220/110 V, 50/60 HzAC 220/110 V, 50/60 Hz
Operation interfaceTouch screenTouch screenTouch screenTouch screen
Dimensions (L×W×H)485 × 456 × 315 mm455 × 456 × 315 mm485 × 435 × 340 mm550 × 610 × 420 mm
Net weight45 kg42 kg52 kg65 kg
PackingWooden caseWooden caseWooden caseWooden case

Applications

— USB and HDMI lead packing: small coils tied at 5-30 mm and counted into cartons with automatic stop at the set quantity.

— Twisted pair and twisted bundle assembly: pairs twisted and tied in one pass without a separate tying station.

— AC and DC cord finishing: short leads coiled and closed before bagging.

— Cable assembly cells: coils tied as they leave the test bench, with the count held on the machine.

— Packing departments: cartons filled to an exact count without a manual tally at the end of the line.

Assorted coiled and tied cables including USB, Cat5e, HDMI and power cordsFour coiled and bound cable samples including USB and braided HDMI cablesFour views of WPM-212A coiling machine with wire spool and power cordsTwo white semi-automatic wire coiling machines with rotary disc and tying jawFront views of WPM-212A coiling machine showing touch screen and tying headCoiling machine at multiple angles with accessory kit and foot pedalCable coils on spools and finished coiled power cords
Semi-Automatic Wire Coiling & Binding Machine WPM-212A
Semi-Automatic Wire Coiling & Binding Machine WPM-212A

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each