The WPM-18-45 cuts cable to a fixed length, winds it into a coil and closes a PE iron-core tie around the coil in one automatic cycle, with a counter running the output. Winding outside diameter runs from 20 to 200 mm with a 100-200 mm winding pitch, and the tie closes at 18 to 45 mm using a 120-200 mm tie.
Cutting, coiling and tying are three separate hand operations, and the coil size changes with whoever is at the bench. On the 18-45 the cut length, the winding pitch and the tie position are machine values, so every coil leaves at the same size and is tied at the same place. Tying takes 0.6 s and winding runs 1 to 10 cycles per second, so the operator's time goes into loading the pay-off end.
It is a floor-standing cabinet unit at 200 x 620 x 1030 mm, and the closest model in the group is the WPM-5-30. Both tie at 18-45 mm; the 18-45 coils to 20-200 mm outside diameter on under 200 W, while the 5-30 takes 1-8 mm wire up to 30 m per coil with a 280 mm maximum outside diameter and 1500 W. Choose the 18-45 for short, tight coils of small cable.
Key Features
1. Cut to fixed length, wind and tie in one automatic cycle, with a count meter on output.
2. Winding outside diameter 20-200 mm; winding pitch 100-200 mm.
3. PE iron-core tie, 120-200 mm long, closing a coil of 18-45 mm at 0.6 s per tie.
4. Winding speed 1-10 cycles per second, set per product.
5. LCD touchscreen for setup, with a high-accuracy count meter and customisable winding tooling.
6. Floor cabinet 200 x 620 x 1030 mm, under 200 W, AC 220 V 50 Hz or 110 V 60 Hz.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-18-45 |
|---|
| Function | Fixed-length cutting, winding and tying |
|---|
| Suitable cable tie length | 120-200 mm |
|---|
| Binding diameter | 18-45 mm |
|---|
| Winding outer diameter | 20-200 mm |
|---|
| Winding pitch | 100-200 mm |
|---|
| Binding speed | 0.6 s/time |
|---|
| Winding speed | 1-10 cycles/s |
|---|
| Tie material | PE iron core |
|---|
| Power supply | AC 220 V 50 Hz / 110 V 60 Hz |
|---|
| Power | below 200 W |
|---|
| Dimensions | 200 x 620 x 1030 mm |
|---|
Applications
— Power cord manufacturing: cutting cordsets to length, coiling and tying for retail packing.
— Harness leads: short leads produced as tied coils of a fixed cut length.
— Appliance and lighting cords: coils of 20-200 mm outside diameter tied at 18-45 mm.
— Cable assembly lines: one machine replacing separate cutting, coiling and tying stations.
— Distributors: converting drums into fixed-length tied coils for stock.