Automatic USB Type-C Cable Soldering Machine - 800-1200pcs/h JW-SD02
Automatic USB Type-C Cable Soldering Machine - 800-1200pcs/h JW-SD02 Thumb Automatic USB Type-C Cable Soldering Machine - 800-1200pcs/h JW-SD02 Thumb
Video Thumbnail

Automatic USB Type-C Cable Soldering Machine - 800-1200pcs/h JW-SD02

📅 2026-05-17 👁️ 667
  • Model No: JW-SD02

  • Specifications

    Automatic USB Type-C Cable Soldering Machine - 800-1200pcs/h
    Voltage: AC220V/110V
    Power: 600W
    Air Pressure: 0.5-0.8MPa
    Productivity: 800-1200pcs/h
    Dimension: 800*600*1100mm(L*W*H)
    Mounting: Moving on the ground
    Temp control model: Constant temperature
    Soldering material: Soldering wire
    Soldering angle: 90 degree
  • Inquiry now

The JW-SD02 is an automatic soldering machine for USB Type-C cable assemblies. Cables are loaded into fixture nests on an indexing conveyor, Type-C connectors are oriented and presented by a vibratory bowl feeder, and the joint is made at a 90-degree soldering angle. Output is 800 to 1200 pieces per hour, depending on cable construction and operator loading.

Hand soldering a Type-C plug means holding fine conductors in alignment while the iron is applied, and the result depends on the operator's hand. On the JW-SD02 the connector is oriented by the bowl feeder and clamped in the fixture, the soldering head descends on a 0.5–0.8MPa pneumatic stroke at 90 degrees, and the tip temperature is held constant by the controller. The 600W element runs on AC 220V or 110V.

The JW-SD02 is the Type-C variant of the 121 platform. The WPM-121-MN, 121-MC and 121-IP share the same 800–1200pcs/h output, 600W power, 0.5–0.8MPa air supply and 800×600×1100mm frame. They differ in connector tooling: Mini USB, Micro USB and iPhone Lightning respectively. Tooling, not throughput, decides which model is specified.

Key Features

1. Output of 800–1200 pieces per hour, set by cable construction and the rate at which the operator loads fixtures.

2. 90-degree soldering angle with the head driven down on a 0.5–0.8MPa pneumatic stroke onto the connector held in its fixture.

3. Constant-temperature control holds the tip at the set point through the run, with a 600W element on AC 220V or 110V.

4. Vibratory bowl feeder on its own cabinet orients Type-C connectors and delivers them to the loading station in one attitude.

5. Indexing conveyor carries fixture nests past the solder head, separating loading, soldering and unloading into consecutive stations.

6. 800×600×1100mm frame stands on castors with levelling feet, so the machine is moved on the floor and levelled in place.

Technical Specifications

ParameterSpecification
ModelJW-SD02
Machine typeAutomatic USB Type-C Cable Soldering Machine
VoltageAC220V/110V
Power600W
Air Pressure0.5–0.8MPA
Productivity800–1200pcs/h
Dimension800 × 600 × 1100mm (L × W × H)
MountingMoving on the ground
Temp control modelConstant temperature
Soldering materialSoldering wire
Soldering angle90 degree

Applications

— USB Type-C cable assembly houses producing charge and data cables for phones, tablets and laptops.

— Consumer electronics accessory manufacturing, terminating Type-C plugs on multi-core charging cables.

— OEM harness shops building Type-C to Type-A, Type-C to Lightning and Type-C to audio adapters.

— Contract electronics manufacturing, where Type-C leads are produced in batches to customer length and jacket colour.

— Aftermarket cable brands producing braided and TPU-jacketed Type-C cables in counted runs.

Automatic USB Type-C Soldering Machine
Automatic USB Type-C Soldering Machine

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each