The WRD-12Z is a pedestal de-reeler that pays wire off a spool into a cutting or stripping machine. It carries spools up to 35 kg, with a reel ID from 30 mm and OD up to 350 mm, and takes reels with or without a core. The 60 W motor runs on 200-240 V with step-less speed regulation and forward or reverse rotation, in a 300 x 300 x 500 mm frame.
The value is in what the motor does when the downstream machine stops. A sensitive switch watches the wire: with the line tight it keeps the spool aligned and paying off, and when the line goes slack it stops the motor, so the coil does not keep turning and throw loops off the spool. Speed is set by a knob to roughly match the machine, and reverse lets the spool be backed off when a wire run is abandoned.
The 9040 is the larger pay-off: 90 W, frequency-conversion control, horizontal or vertical mounting, 40 kg. The WRD-12Z is the compact unit at 60 W with a 35 kg spool, a slack switch and forward or reverse, sized to sit beside a bench cutter rather than at the head of a line.
Key Features
1. 35 kg spool capacity, with reel OD up to 350 mm and ID from 30 mm.
2. Runs reels with or without a core: expanding spokes with radial pins grip an inside diameter instead of a bobbin.
3. Sensitive switch stops the motor when the line goes slack and restarts on tension, so the coil cannot overrun.
4. Step-less speed regulation from a panel knob, with forward or reverse rotation.
5. 60 W motor on a 200-240 V single-phase supply.
6. 300 x 300 x 500 mm pedestal, positioned at the inlet of a cutting or stripping machine.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WRD-12Z |
|---|
| Machine type | Automatic wire feeder / de-reeler |
|---|
| Max spool weight | 35 kg |
|---|
| Reel type | With or without core |
|---|
| Min ID of reel | 30 mm |
|---|
| Max OD of reel | 350 mm |
|---|
| Speed | Step-less speed regulation |
|---|
| Rotation direction | Forward or reverse |
|---|
| Sensitive switch | Line tight automatic alignment, automatic stop when line relaxation |
|---|
| Rated power | 60W |
|---|
| Operating voltage | 200-240V |
|---|
| Size | 300*300*500 mm |
|---|
Applications
— Pay-off for bench cut-and-strip machines running insulated single-core wire.
— Cable assembly lines feeding a crimping press from 35 kg spools.
— Coil transfer between bulk spools and smaller reels before processing.
— Feeding a coiling or winding station where slack has to be taken up automatically.