The WPM-20T is a high-speed cable stranding and twisting machine rather than a stripper: it takes already prepared conductor ends and twists them into a uniform strand. Control is electronic through a visual interface with a keypad, the governor is adjustable, and the drive runs forward or reverse. It is built as a compact benchtop unit with a carry handle and a row of front-mounted wire clamps.
The difference from twisting by hand or with a plier-type tool is repeatability. Strand pitch and direction are held by the electronic governor instead of operator feel, and the forward/reverse setting lets a lay be corrected or reversed without re-chucking the wire. Because the clamps are on the front face, several leads can be loaded and twisted in sequence without the cable being moved across the bench.
In this group the WPM-20T is the only unit that strands without stripping. The WPM-3F+T and WPM-4F+T strip and twist in the same pneumatic cycle, at 3-25 mm and 3-30 mm respectively, and the WPM-4F+T handles 1-10 wires at a time. The WPM-20T instead stands alone at the twisting station, taking ends that were stripped elsewhere and giving them a controlled lay with an electronic setting rather than a fixed mechanical head.
Key Features
1. Electronic control with a visual interface and keypad for setting speed and strand parameters
2. Adjustable governor holding the set twisting speed across a run instead of a fixed motor speed
3. Forward and reverse direction settings for correcting or reversing the strand lay
4. Pure copper motor in the drive, sized for continuous benchtop operation
5. Multiple front-mounted wire clamps so successive leads can be loaded without repositioning the machine
6. Compact enclosed housing with a carry handle, keeping the drive and controls in one unit
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-20T |
|---|
| Machine Type | Cable stranding and twisting machine |
|---|
| Operation | Electronic control |
|---|
| Speed Control | Adjustable governor |
|---|
| Direction | Forward / reverse settings |
|---|
| Motor Type | Pure copper motor |
|---|
| Application | Wire twisting and stranding |
|---|
| Display | Visual interface |
|---|
Applications
— Cable harness twisting station: stripped leads stranded to a set pitch before tinning
— Network and communication cable assembly: conductor pairs twisted to a controlled lay
— Ground wire preparation: multiple strands consolidated into a single tail for lug crimping
— Appliance and power lead assembly: twisted tails formed uniformly across a production batch
— Rewind and repair work: existing twisted sections re-laid or reversed to match a drawing