Automatic Multi-Core Wire Stripping & Twisting Machine WPM-4F+T
Automatic Multi-Core Wire Stripping & Twisting Machine WPM-4F+T Thumb
Video Thumbnail

Automatic Multi-Core Wire Stripping & Twisting Machine WPM-4F+T

📅 2026-03-06 👁️ 588
  • Model No: WPM-4F+T

  • Specifications

    Model Number: WPM-4F+T
    Voltage: 220V 50Hz / 110V 60Hz
    Power: 90W
    Suitable Wire Size: 0.1-0.75mm² (AWG18#-32#)
    Ability to Strip/Twist: 1-10 pcs/times
    Stripping/Twisting Length: 3-30mm
    Stripping/Twisting Speed: 120-130 times/min
    Air Pressure: 0.5-0.7MPa
    Weight: 18kg
    Dimension: 320*300*400mm
  • Inquiry now

The WPM-4F+T is a pneumatic stripping and twisting machine for multi-core cable. It processes 1-10 wires per cycle over a stripping and twisting length of 3-30 mm, for conductors of 0.1-0.75 mm2 (AWG 18-32). Power is 90 W at 220 V/50 Hz or 110 V/60 Hz, air supply is 5-7 kg, and the unit measures 320 x 300 x 400 mm at 18 kg.

The gain over a single-head stripper is in the cycle count, not the cycle time. A flat or round multi-core cable is loaded once and the whole group of conductors is stripped and twisted together, so a ten-core tail is finished in the time a single lead used to take. Against hand work, the twist length is set on the machine to 3-30 mm and repeats on every core, which removes the variation that shows up when a harness is twisted by eye.

Within the group the 4F+T is the multi-core member: 1-10 wires per cycle at 120-130 times/min. The WPM-3F+T strips and twists one lead at a time over 3-25 mm at 120-30 pcs/min. The WPM-3F and WPM-4F strip only, with no twisting head, at 20 mm and 30 mm maximum stripping length, and the WPM-3FA strips by electric heat for AWG 18-32 braided cable.

Key Features

1. 1-10 conductors stripped and twisted per cycle, so a multi-core tail is finished in one load

2. Wire range 0.1-0.75 mm2 (AWG 18-32), covering computer, telephone and control cable cores

3. Stripping and twisting length 3-30 mm, set on the machine and repeated on every core

4. Cycle rate of 120-130 times/min, materially higher than single-lead handling

5. 90 W electrical consumption with a 5-7 kg pneumatic head, so running cost stays with the air supply

6. 320 x 300 x 400 mm frame at 18 kg, with a regulator and gauge on the air inlet

Technical Specifications

ParameterSpecification
ModelWPM-4F+T
FunctionAutomatic multi-core wire stripping and twisting
Voltage220 V 50 Hz / 110 V 60 Hz
Power90 W
Suitable Wire Size0.1-0.75 mm2 (AWG 18-32)
Strip / Twist Capacity1-10 pcs per cycle
Stripping / Twisting Length3-30 mm
Stripping / Twisting Speed120-130 times/min
Air Pressure5-7 kg
Weight18 kg
Dimensions320 x 300 x 400 mm

Model Range at a Glance

The WPM-3F series shares one vertical stripping platform. Plain models strip only, the H variant adds a heated blade, and the T variants strip and twist multi-core cables in a single pass. Compare the capacity and footprint below.

ParameterWPM-3FWPM-4FWPM-3F+HWPM-3F+TWPM-4F+T
FunctionStrip onlyHeated bladeStrip and twist
Wire gauge (AWG)AWG 18–32AWG 18–32AWG 18–32
Stripping length20 mm30 mm20 mm20 mm30 mm
Air pressure5–7 kg5–8 kg5–7 kg5–7 kg5–8 kg
Dimensions (L×W×H)260×150×270 mm320×190×320 mm260×150×270 mm260×150×270 mm320×190×320 mm
Net weight14 kg18 kg14 kg14 kg18 kg
PackingWooden case, standard export packing

Applications

— Computer and data cable assembly: multi-core tails stripped and twisted in one pass before connector soldering

— Telephone and communication cable production: grouped conductors prepared for IDC and modular plugs

— Control and signal cable harnesses: 4 to 10 core tails stripped and twisted for terminal blocks

— Flat ribbon and parallel lead processing: all conductors in the web stripped and twisted together

— Appliance internal wiring: multi-core looms prepared at the ends before crimping

Pneumatic wire stripping machine with CE mark, foot pedal and stripped wire samples
Multi-Core Wire Strip Twisting Machine WPM-4F+T

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each