The WPM-RT-81M winds 3-6 mm cable into a figure-8 bundle and closes it with a single cable tie. Wire lengths of 1-10 m are wound at 80-160 mm spacing and tied across the crossover at a bundle diameter of 40 mm or less, with head retention of 0-400 mm and a tail of 100-280 mm. Winding runs on a 1000 W servo motor and the traverse on a 750 W servo, with Yadeke cylinders and solenoid valves driving the clamp and tie sequence.
Bundled by hand, the same cable needs a folding jig, a tie gun and a check that head and tail match the packing drawing. Here the operator presents the cut cable and the machine spreads, folds, ties and discharges it, so the folding step, the tie-gun consumable handling and the second inspection pass are removed from the cell. Output is rated at 1000 pcs/h, and the 7.5 kg tie roll sets the reload interval rather than the cycle.
Among the winding units here, the RT-81M is built around a long lead: head retention runs from 0 to 400 mm where the figure-8 models normally stop at 130-250 mm, and the 80-160 mm winding spacing is wider than the 80-120 mm used on the 4 mm rope machines. It winds and ties only, with no cut or strip station, so it suits cells that already run a cutter rather than the cut-strip-tie models rated at 200-400 pcs/h.
Key Features
1. Figure-8 single tie: the bundle is folded across itself and closed with one tie at 40 mm diameter or less, both tails kept on the same side.
2. 3-6 mm cable over 1-10 m lengths, sized for power and multi-core cord rather than light USB leads.
3. Head retention 0-400 mm and tail 100-280 mm, set per bundle so the leads match the terminal or connector drawing.
4. Winding spacing 80-160 mm, wider than the 80-120 mm of the 4 mm rope winders, for thicker jackets that need a flatter lay.
5. Winding servo 1000 W and traverse servo 750 W, with Yadeke cylinders and solenoid valves on the clamp and tie sequence.
6. 1000 pcs/h rated output on a 7.5 kg tie roll; 2.5 kW, 1200 x 850 x 1600 mm cabinet, about 230 kg.
Technical Specifications
| Parameter | Specification |
|---|
| Model Number | WPM-RT-81M |
|---|
| Winding Shape | Figure-8, single cable tie |
|---|
| Applicable Wire Diameter | 3-6 mm |
|---|
| Suitable Wire Length | 1-10 m |
|---|
| Winding Spacing | 80-160 mm |
|---|
| Head Length | 0-400 mm |
|---|
| Tail Length | 100-280 mm |
|---|
| Tie Diameter | ≤40 mm |
|---|
| Tie Tape Capacity | ≤7.5 kg/roll |
|---|
| Production Efficiency | ≤1000 pcs/h |
|---|
| Winding Motor | Servo 1000 W |
|---|
| Traverse Motor | Servo 750 W |
|---|
| Pneumatic Components | Yadeke cylinders and solenoid valves |
|---|
| Machine Power | 2.5 kW |
|---|
| Machine Dimensions | 1200 W x 850 D x 1600 H mm |
|---|
| Machine Weight | About 230 kg |
|---|
Applications
— Power cord sets: 3-6 mm PVC-jacketed cords cut to 1.5-3 m, figure-8 wound and single-tied for export cartons.
— Appliance leads: 2-3 m moulded-plug leads bundled with the head retained at the plug end for downstream packing.
— Multi-core control cable: 4-6 mm flexible control cable in 3-8 m lengths, bundled for machine wiring kits.
— Braided and textile-covered cord: 3-5 mm braided lamp cord wound at 80-160 mm spacing without flattening the braid.
— Extension cord: 8-10 m three-core cord folded as a single figure-8 package with both tails exposed.