The WPM-CPRT81TH takes 6-10 mm cable, cuts it to 1-6 m at ±15 mm, strips both ends and closes the bundle as a figure-8 with a single tie. Head retention is held at 200-250 mm with 17-32 mm of insulation removed, and the tail is held at the same length and stripped to the same 17-32 mm. The bundle forms in a 240-260 mm adjustable inner diameter and is tied at 40 mm or less with coated iron-core tape.
Split across separate machines, the cable passes a cutter, then a stripper, then a folding and tying station, and the bundle is handled again at every transfer. This model carries the three operations in line and discharges a stripped, tied bundle, so the intermediate coils, the second handling pass and a separate strip check are removed. Output is rated at 200-400 pcs/h.
It is the heaviest stranded cable in the CPRT cut-strip-tie range: 6-10 mm against 4-8 mm on the CPRT-02TH2 and 2-5 mm on the CPRT-02TH, and the only one of the three that ties a figure-8 instead of a circle with a double tie. The cost of that range is the shortest cut window in the family, 1-6 m, and a 5 kW, 1200 kg frame on a 3000 mm bed.
Key Features
1. Four operations in line: meter cut, both-end strip, figure-8 fold and single tie, with no intermediate handling of the bundle.
2. 6-10 mm cable, the top of the range here; the 4-8 mm and 2-5 mm machines cover the smaller sizes.
3. Cut length 1-6 m at ±15 mm, with a 240-260 mm adjustable bundle inner diameter.
4. Head and tail both held at 200-250 mm with 17-32 mm stripped, set independently of the cut length.
5. Figure-8 single tie at 40 mm or less, fed from a 7.5 kg roll of coated iron-core tape.
6. 200-400 pcs/h from a 5 kW drive on a 3000 x 1100 x 1850 mm frame, about 1200 kg.
Technical Specifications
| Parameter | Specification |
|---|
| Model Number | WPM-CPRT81TH |
|---|
| Applicable Wire Diameter | 6-10 mm |
|---|
| Cutting Length | 1-6 m |
|---|
| Cutting Accuracy | ±15 mm |
|---|
| Bundle Shape | Figure-8, single cable tie |
|---|
| Bundle Inner Diameter | 240-260 mm, adjustable |
|---|
| Binding Diameter | ≤40 mm |
|---|
| Stripping Mode | Complete stripping at both ends |
|---|
| Head Retention Length | 200-250 mm, adjustable |
|---|
| Head Stripping Length | 17-32 mm, adjustable |
|---|
| Tail Length | 200-250 mm |
|---|
| Tail Stripping Length | 17-32 mm, adjustable |
|---|
| Production Efficiency | 200-400 pcs/h |
|---|
| Applicable Binding Tape | Coated iron core, ≤7.5 kg/roll |
|---|
| Power Supply | 240 V / 50 Hz |
|---|
| Machine Power | 5 kW |
|---|
| Machine Dimensions | 3000 L x 1100 W x 1850 H mm |
|---|
| Machine Weight | About 1200 kg |
|---|
Applications
— Industrial power cable: 6-10 mm three- and four-core PVC cable cut to 2-5 m, stripped both ends and figure-8 tied for panel wiring.
— Battery and inverter cable: 8-10 mm flexible cable in 3-6 m lengths, stripped and bundled for equipment assembly kits.
— Site extension cable: 6-10 mm three-core cable cut to 3-6 m, both ends stripped and tied in a flat figure-8 for site distribution.
— Marine and yard harness: tinned multi-core cable of 6-8 mm, cut, stripped and bundled for outdoor equipment looms.
— Heavy appliance leads: 6-8 mm rubber-jacketed leads with 17-32 mm of insulation removed at each end, tied for installation.