The WPM-845A applies a twist tie and does nothing else: there is no winding head. The operator brings a pre-formed coil or a straight bundle to the tie jaw, the machine draws twist tie wire from the spool on the 200 mm bracket, wraps it, twists it and cuts it. Bundles from 5 to 30 mm are closed with a single tie per cycle.
Hand twisting leaves a different number of turns and a different tension on every bundle, and the wrist sets the pace. The 845A runs a PLC sequence over four stepping motors at 0.75 s per tie, 66 to 75 ties per minute and a rated 2200 bundles per hour, so the tie count and the tightness are the same at the end of a shift as at the start.
Compared with the 212 series, the 845A does not coil, which makes it the tying step on its own: it accepts whatever bundle is presented, including hoses and other cylindrical objects up to 30 mm, and takes 500 x 300 x 350 mm of bench. Use it where the coil is formed by hand or by an upstream coiler; use the 212, 212C or 212L where winding and tying have to happen in one cycle.
Key Features
1. Twist tie only - no winding head; the bundle is presented to the jaw already formed.
2. Single tie closes bundles from 5 to 30 mm at any point along the bundle.
3. 0.75 s per tie, 66-75 ties per minute, rated 2200 bundles per hour.
4. PLC control driving four stepping motors for repeatable twist count and tension.
5. Twist tie wire on a 200 mm spool bracket, fed, twisted and cut automatically.
6. Under 200 W, 40 kg, 500 x 300 x 350 mm; AC 220 V 50/60 Hz or AC 110 V 60 Hz.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-845A |
|---|
| Function | Twist tie only (no coiling) |
|---|
| Bundle diameter | 5-30 mm single tie |
|---|
| Bundle speed | 0.75 s/time, 66-75 times/min |
|---|
| Capacity | 2200 bundles/hour |
|---|
| Control | PLC with four stepping motors |
|---|
| Bundle wire axle bracket height | 200 mm |
|---|
| Input voltage | AC 220 V 50/60 Hz, AC 110 V 60 Hz |
|---|
| Power | below 200 W |
|---|
| Dimensions | 500 x 300 x 350 mm |
|---|
| Net weight | 40 kg |
|---|
| Ambient humidity | 85% RH or below |
|---|
Model Range at a Glance
Four models in the WPM-845 series share the same 0.6 s tying cycle, ribbon construction and HMI touch screen control. Tie length, bundle diameter and frame size increase from WPM-845A to WPM-845D.
| Parameter | WPM-845A | WPM-845B | WPM-845C | WPM-845D |
|---|
| Voltage | AC 220/50 Hz, AC 110/60 Hz | AC 220/50 Hz, AC 110/60 Hz | AC 220/50 Hz, AC 110/60 Hz | AC 220/50 Hz, AC 110/60 Hz |
|---|
| Rated power | ≤100 W | ≤100 W | ≤100 W | ≤100 W |
|---|
| Dimensions (L×W×H) | 350 × 456 × 315 mm (excluding ribbon cassette) | 380 × 420 × 340 mm (excluding ribbon cassette) | 380 × 435 × 340 mm (excluding ribbon cassette) | 380 × 435 × 340 mm (excluding ribbon cassette) |
|---|
| Net weight | 25 kg | 32 kg | 40 kg | 45 kg |
|---|
| Tie length | 65–130 mm | 75–140 mm | 120–190 mm | 200–300 mm |
|---|
| Bundle diameter | 5–30 mm | 8–30 mm | 18–45 mm | 40–80 mm |
|---|
| Tying speed | 0.6 s/cycle | 0.6 s/cycle | 0.6 s/cycle | 0.6 s/cycle |
|---|
| Ribbon | Steel core, plastic coated | Steel core, plastic coated | Steel core, plastic coated | Steel core, plastic coated |
|---|
| Control | HMI touch screen | HMI touch screen | HMI touch screen | HMI touch screen |
|---|
Applications
— Harness and cable assembly: tying pre-coiled harness bundles after the coil has been formed upstream.
— Hose and tubing coils: closing flexible hose coils up to 30 mm at the tie point.
— Power cord packing: tying coils and folded leads before bagging or boxing.
— Wire and cable distribution: cutting bulk coils into shorter tied bundles for stock.
— General bundling: cylindrical parts and cable groups where a wire twist tie is preferred to tape.