Fully Automatic PTFE Tape Winding Machine WPM-1310
Fully Automatic PTFE Tape Winding Machine WPM-1310 Thumb Fully Automatic PTFE Tape Winding Machine WPM-1310 Thumb
Video Thumbnail

Fully Automatic PTFE Tape Winding Machine WPM-1310

📅 2026-05-16 👁️ 2,438
  • Model No: WPM-1310

  • Specifications

    Model Name: P.T.F.E. tape wrapping and winding machine
    Applicable: Suitable for all raw tape wrapping equipment for all threaded joints, especially for raw tape ZG1/8-1 inch half-threaded joint
    Pressure: 0.6MPa
    Power: 750W
    Voltage: 220V
    Size: 450*400*560mm
    Weight: 70kg
    Working Speed: 3-5 pieces/Second (wrap 2-3 circles)
    Type: Electric and automatic
  • Inquiry now

The WPM-1310 winds PTFE thread sealing tape onto threaded fittings, mainly ZG 1/8 to 1 inch half-threaded joints. A vibratory bowl feeder lines the fittings up and delivers them to the head, the head wraps two to three turns, and the cycle runs at 3-5 pieces per second. The unit is electric and automatic, 750 W at 220 V, with a 0.6 MPa air supply.

Hand wrapping PTFE tape gives uneven tension: too loose and the joint weeps, too tight and the tape shears at the thread root. The WPM-1310 turns the fitting against a driven tape path for a fixed number of turns, so each joint gets the same wrap count and the same tension. Part feeding, wrapping and discharge run without the operator holding the fitting, with the cycle started from a foot pedal and the parameters set on the touch screen.

This is the fully automatic PTFE unit of the range. The sister model WPM-1308 (194) uses the same 750 W head, 0.6 MPa air and 3-5 pieces per second, but is specified for 5, 7, 10 and 14 mm tape and threads up to 1 1/2 inch; the WPM-1310 is set for ZG 1/8-1 inch and adds the bowl feeder. The WPM-75 (278) and WPM-TP (279) work on wire coils and cable, not on fittings. The 70 kg frame and 450 x 400 x 560 mm footprint suit a position beside the assembly line.

Key Features

1. PTFE tape winding for ZG 1/8 to 1 inch half-threaded joints

2. 3-5 pieces per second, two to three wraps per joint

3. Vibratory bowl feeder delivers fittings to the head without manual loading

4. Foot pedal cycle start with touch-screen parameter setting

5. 750 W on 220 V, 0.6 MPa air supply

6. 70 kg frame, 450 x 400 x 560 mm

Technical Specifications

ParameterSpecification
ModelWPM-1310
FunctionPTFE tape wrapping and winding for threaded joints
Applicable threadZG 1/8 - 1 inch half-threaded joints
Working speed3-5 pcs/s, 2-3 wraps
FeedingVibratory bowl feeder
ControlTouch screen, foot pedal start
Power220 V, 750 W
Air pressure0.6 MPa
TypeElectric, automatic
Dimensions450 x 400 x 560 mm
Weight70 kg

Applications

— Plumbing fittings - PTFE tape on ZG 1/8 to 1 inch half-threaded brass and plastic joints before assembly

— Pneumatic components - sealing threads on air fittings and quick couplers

— Water treatment and sanitary fittings - tape winding on threaded stainless connectors

— Valve and manifold assembly - pre-taping threaded ports before leak testing

— Batch production of threaded inserts - bowl-fed winding at 3-5 pieces per second

Assorted brass and stainless threaded fittings wrapped with white PTFE tapeThree step guide: place fitting, wrap fitting, use fitting with PTFE tape applicatorHand placing a threaded fitting inside the PTFE tape winding machineManual versus machine PTFE tape wrapping compared, with cutaway thread sectionHand holding a taped threaded fitting beside two white PTFE tape rollsProduction collage of PTFE taped fittings, springs and coiled hose assemblies
Auto PTFE Tape Wrapping Winding WPM-1310

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each