Wireless Handheld Tape Wrapping Machine for Cable Harness AT-101L
Wireless Handheld Tape Wrapping Machine for Cable Harness AT-101L Thumb Wireless Handheld Tape Wrapping Machine for Cable Harness AT-101L Thumb
Video Thumbnail

Wireless Handheld Tape Wrapping Machine for Cable Harness AT-101L

📅 2026-05-12 👁️ 1,261
  • Model No: AT-101L

  • Specifications

    Model Number: AT-101L
    Weight: 1.95kg
    Inner Hole Dimensions: 37mm x 32mm x 76mm
    Tape Width Range: 3-52mm
    Power Supply: AC220V 50/60Hz
    Machine Size: 140 x 170 x 380mm
    Battery Runtime: 5 hours continuous use
    Base Load Capacity: 5 kg
  • Inquiry now

The AT-101L is a cordless handheld with a widened head, built for wide tape and large bundles. It accepts tape from 3 mm to 52 mm wide, winds up to 60 mm outside diameter, and runs spiral or continuous winding at five speed settings, for five hours per charge. The body is 1.95 kg in a 140 x 170 x 380 mm frame, with a 5 kg base load for bench work.

Wrapping a 50 mm bundle with 50 mm tape by hand takes two hands and a lot of wrist travel, and the wrap loosens where the harness bends. The AT-101L uses an enlarged open throat with an aluminium segment ring, so the branch passes through the opening and the tool can be set back on the main run beyond a side leg without cutting the tape. Continuous winding keeps the ring turning along the run, and spiral winding is selected when the tape has to advance as it turns.

This is the widest-tape model in the handheld range: 3-52 mm against 9-25 mm on the AT-101 (430) and 10-25 mm on the AT-101G (441), and its 60 mm winding diameter is the largest of the four. The AT-101D (488) is the same class of battery tool supplied on a desktop stand. Specify the AT-101L where the tape is wider than 25 mm, or where the bundle is a main trunk rather than a branch.

Key Features

1. Widened head accepting tape from 3 mm to 52 mm

2. Maximum winding outside diameter 60 mm

3. Spiral winding and continuous winding modes

4. Five speed settings

5. Five speed settings, 5 hours of continuous use per charge on AC 220 V 50/60 Hz supply

6. 1.95 kg body, 5 kg base load, open ring design for branch skipping

Technical Specifications

ParameterSpecification
ModelAT-101L
TypeCordless handheld, widened head
Tape width range3-52 mm
Max winding outside diameter60 mm
Winding modesSpiral winding, continuous winding
Speed control5 settings
Battery runtime5 hours continuous
Power supplyAC 220 V 50/60 Hz
Machine size140 x 170 x 380 mm
Weight1.95 kg
Base load capacity5 kg

Applications

— Heavy harness - wide tape on 40-60 mm main runs of truck and bus looms

— Industrial equipment wiring - taping large bundles routed along machine frames

— Wind and solar cable assembly - wrapping thick power leads at junction boxes

— Rail and marine harness - wide tape on long runs with frequent branch take-offs

— Construction machinery - taping main trunk bundles before conduit installation

Pneumatic wire stripping machine with foot pedal, double-acting cylinder and imported blade close-upStripped multi-core cable samples beside single wires with exposed copper conductorsWPM-3F pneumatic wire stripping machine with CE and ISO 9001 marks and labelled detail panels
Handheld Wire Tape Wrapping Machine AT-101L
Handheld Wire Tape Wrapping Machine AT-101L

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each