Hook Loop Bending Machine for Metal Wires 1-6mm | JINGWEI JW-ST02
Hook Loop Bending Machine for Metal Wires 1-6mm | JINGWEI JW-ST02 Thumb
Video Thumbnail

Hook Loop Bending Machine for Metal Wires 1-6mm | JINGWEI JW-ST02

📅 2026-03-14 👁️ 326
  • Model No: JW-ST02

  • Specifications

    Wire Size Range: 1-6 square (mm)
    Bending Capability: U shape, round shape, arcs, semi-circular arcs
    Operation: One-time forming
    Control: Touch switch with mathematics display
    Power System: Air pressure valve with pressure gauge
    Material Compatibility: Various wires, iron wires, metal wires
    Application: Hardware and wire industry processing
  • Inquiry now

The JW-ST02 forms hooks, U shapes, full rounds, arcs and semi-circular arcs from 1-6 mm2 metal wire in a single cycle. The forming head is air-driven, the bend data is entered on the touchscreen, and working pressure is set on the valve and gauge at the side of the machine.

Hand bending over a pin jig gives a different radius every time and usually needs a second operation to close the loop. Here the pneumatic head forms the wire round the die in one stroke and the part comes out finished; because the bend data is entered as numbers on the touchscreen, the next batch is set from the same values instead of from a sample held up to the light.

It bends only: it does not cut, strip or straighten, which separates it from the JW-ST03 stripping machine and the CT01 wire-rope cutter. Within the range it is the unit for ear loops, S-hooks and wire handles rather than for preparing conductor ends.

Key Features

1. 1-6 mm2 wire range, covering iron wire and non-ferrous wire used in hardware parts.

2. U shape, round, arc and semi-circular arc formed in one cycle, with no secondary closing pass.

3. Touchscreen with numeric entry for bend parameters, so repeat jobs are recalled rather than re-set by trial.

4. Pneumatic forming head with pressure valve and gauge, setting force to the wire gauge instead of to the operator's arm.

5. Red emergency stop on the top panel and adjustable feet for levelling on an uneven bench.

6. Die block recessed behind a brushed stainless front panel, so the wire is fed at table height and the formed part drops clear.

Technical Specifications

ParameterSpecification
ModelJW-ST02
Machine typePneumatic hook and loop bending machine
Wire size range1-6 mm2
Bending capabilityU shape, round shape, arcs, semi-circular arcs
OperationOne-time forming
ControlTouch switch with numeric display
Power systemAir pressure valve with pressure gauge
Material compatibilityIron wire, metal wire, various wires

Applications

— Hardware plants: S-hooks and ear loops from iron wire, formed in one cycle.

— Display and shelving: wire hooks and U-brackets for pegboard and rack systems.

— Wire basket and trolley production: handles and rim loops bent on the pneumatic head.

— Garden and fencing: loop ends and arc sections on coated wire.

— Garment accessories: hook-and-loop wire parts for hangers and display stands.

Automatic looping machine with touch screen, red button and looped copper wire insetAutomatic looping machine compared with manual bending pliers and poor bendsLooping machine with bending mechanism, U-shape and round loop samplesLooping machine 500x270x170mm dimensions with pneumatic regulator and parameter tableLoop samples: copper wires looped both ends and yellow-sleeved loopsTouch screen, bending mechanism and air pressure valve close-upsFront and rear views of the compact automatic looping machineTop, side and base views showing pneumatic routing on the looping machineAccessories: three fixtures, blue air tube, foot pedal and power cable
High Accuracy Hook Looping Bender

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each