The WPM-CPRT-02TH cuts 4-8 mm cable to 3-14 m at ±15 mm, strips both ends, winds the length into a circle and closes it with a double tie. The coil is formed to an adjustable 200-300 mm inner diameter and bound at 40 mm or less, so the finished item is a flat ring held by two ties rather than a folded bundle.
Separate cutter, stripper and winding stations mean the coil is measured once, stripped at a second station and wound at a third, with the count reconciled between them. Here the cable enters as reel stock and leaves as a stripped, tied ring in one pass, which removes the two transfers and the manual strip-length check. Output is 200-380 pcs/h.
Within the CPRT range it fills the gap between the 2-5 mm CPRT-02TH with its 3-40 m cuts and 300-400 mm coil, and the 6-10 mm CPRT81TH that ties figure-8. The 02TH2 covers 4-8 mm at 3-14 m with a 200-300 mm ring, ties twice per coil, and holds 380 pcs/h with a 4 kW drive.
Key Features
1. Cut, both-end strip, circle wind and double tie in one pass over a 3-14 m length range.
2. 4-8 mm cable: heavier than the 2-5 mm CPRT-02TH, lighter than the 6-10 mm CPRT81TH.
3. Circle inner diameter 200-300 mm adjustable, a smaller ring than the 300-400 mm of the 02TH.
4. Double tie at 40 mm or less: two straps per coil, so the wrap still holds if one is cut in transit.
5. 200-380 pcs/h with both ends stripped, from a 4 kW drive, 220 V / 50 Hz.
6. 2500 x 1100 x 1850 mm guarded cabinet, about 1200 kg, 220 V / 50 Hz supply.
Technical Specifications
| Parameter | Specification |
|---|
| Model Number | WPM-CPRT-02TH |
|---|
| Applicable Wire Diameter | 4-8 mm |
|---|
| Cutting Length | 3-14 m |
|---|
| Cutting Accuracy | ±15 mm |
|---|
| Binding Mode | Double tie |
|---|
| Circle Inner Diameter | 200-300 mm, adjustable |
|---|
| Binding Diameter | ≤40 mm |
|---|
| Stripping | Automatic stripping at both ends |
|---|
| Production Efficiency | 200-380 pcs/h |
|---|
| Power Supply | 220 V / 50 Hz |
|---|
| Machine Power | 4 kW |
|---|
| Machine Size | 2500 L x 1100 W x 1850 H mm |
|---|
| Machine Weight | 1200 kg |
|---|
Applications
— Power cord sets: 4-8 mm PVC mains cord cut to 3-8 m, stripped both ends and wound into a double-tied ring for cartons.
— Outdoor and garden cable: 4-6 mm rubber cable in 5-14 m lengths, ringed and tied for retail display.
— Hoist and tool cable: 5-8 mm flexible cable cut to 4-10 m, stripped and coiled for equipment supply.
— Stage and audio power cable: 4-6 mm three-core cable ringed at 200-300 mm inner diameter for rental stock.
— Pump and compressor leads: 6-8 mm cable with both ends stripped, ringed and double-tied for OEM packing.