The WPM-KAC05B strips and crimps loose tubular ferrules onto 0.5-4 mm² wire in a single 1.5 s cycle. Ferrules go into a vibration plate in bulk, are oriented and fed to the crimp station, and the machine strips 8-12 mm of insulation before the head closes.
Loose ferrules have to be picked, oriented and held by hand before crimping, and hand tools produce a crimp that varies with grip. On the KAC05B the vibration plate does the orienting, and the two dies close horizontally from left and right in parallel, so the barrel is compressed from both sides at once and stays centred on the conductor. Strip length is set on the touch screen, which keeps the conductor length inside the barrel constant from piece to piece.
Against the semi-automatic WPM-5-40, the KAC05B is faster at 1.5 s versus 2.5 s and needs no hand feeding of the ferrule, at the cost of a bowl that has to be matched to each ferrule size. The 5-40 remains the choice where ferrule sizes change several times a day.
Key Features
1. Cycle: 1.5 s per wire end, strip and crimp in one index
2. Wire range: BVR hard wire 0.5-4 mm², soft wire 0.5-2.5 mm²
3. Strip length: 8-12 mm, set on the touch screen
4. Terminal feed: vibration plate with a clear acrylic guard over the bowl
5. Crimp: left and right dies close horizontally in parallel, centring the ferrule barrel on the conductor
6. Frame: 42×40×39 cm stainless housing, 30 kg, with the control panel on the left front and the bowl and crimp head at the top
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-KAC05B |
|---|
| Machine type | Automatic loose terminal crimping machine |
|---|
| Processing wire size | 0.5-4 mm² |
|---|
| Applicable wire | BVR hard wire 0.5-4 mm², soft wire 0.5-2.5 mm² |
|---|
| Stripping length | 8-12 mm |
|---|
| Cycle time | 1.5 s |
|---|
| Terminal supply | Vibration plate feeding |
|---|
| Crimping method | Left and right horizontal crimping in parallel |
|---|
| Control method | Touch screen, electronic control, pneumatic control |
|---|
| Working pressure | 0.3-0.8 MPa |
|---|
| Power supply | AC220 V, 50 Hz |
|---|
| Working temperature | -10 to 40 °C |
|---|
| Dimensions | 42×40×39 cm |
|---|
| Weight | 30 kg |
|---|
Applications
— Control cabinet and distribution board wiring: 0.5-4 mm² BVR with loose ferrules, crimping before terminal assembly
— Machine builder panels: multi-core flexible wire into spring and screw terminals
— Appliance harness: 0.5-2.5 mm² soft wire with insulated ferrules at connector entries
— Lighting and power supply assemblies: 1.0-4 mm² leads into plug-in terminal blocks
— Volume ferrule work where one ferrule size runs for hours and the bowl can stay dedicated