AT-101 Handheld Tape Wrapping Machine User Manual

Button Overview
1. Brake button
2. Speed reduce button "-"
3. Speed accelerate button "+"
4. Power master switch
The speed has 5 gears and can be adjusted according to actual operation and production requirements.
Driving Part
The brake button is pressed to brake, and the blue light is always on. If you want to cancel the braking, gently touch the brake button.
Press the power master switch. When the machine is on standby, the green light is on.
Operation Modes
Mode 1: Double-click the switch button to run. Release it and click once to stop running.
Mode 2: Click the switch button to start running. Release and it will stop automatically.

2. Control Panel Details
Button Functions
5. Start/Stop switch
6. Power adapter pin hole
7. 2000mAh lithium battery pins
8. Pedal switch pin hole
When the machine is on standby and the green light is always on, double-click the Start/Stop button to start running. When the button is pressed again, the flywheel buffers one circle and then stops working, and the machine returns to standby state.
If you turn the flywheel manually, you need to press the brake button, which can be turned when the blue light and green light are always on.

3. Transmission Part

Slide up and release the lock to remove the bracelet.
Slide down and lock it to install.
Pull the bracelet to install and disassemble.

5. Overall Schematic Diagram