JW Touch Screen Series Wire Stripping & Cutting Machines catalog

Touch Screen Wire Stripper Series
JW-SD/S - Four-wheel drive wire stripper with touch screen
Model: JW-SD/S
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-30;rear end:0-15mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: 0.1～4mm²
Max conduit inside diameter:  6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100MM piece/hour） 4000-5000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-SDB/S - Double wire stripper with touch screen
Model: JW-SDB/S
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-30;rear end:0-15mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: Double wire 0.1～2.5mm²; Single wire 0.1～4mm²
Max conduit inside diameter:  6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100MM piece/hour） 5000-10000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-SDB2/S - Double wire stripper with touch screen and jump tube
Model: JW-SDB2/S
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-30;rear end:0-30mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: Double wire 0.1～2.5mm²; Single wire 0.1～4mm²
Max conduit inside diameter:  6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100MM piece/hour） 5000-10000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-SDB4/S - Four wire stripper with touch screen and jump tube
Model: JW-SDB4/S
Weight: 37KG
Power: 500 W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～10000mm
Strip length: Front end:0-50;rear end:0-30mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: BVR Four wire 0.1～2.5mm²; BVR Single wire 0.1～10mm²
Max conduit inside diameter:  6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100MM piece/hour） 3000-10000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-E/S - 6mm² touch screen stripper
Model: JW-E/S
Weight: 28KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 300W
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-35;rear end:0-15mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: 0.1～6mm²
Max conduit inside diameter:  8mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100MM piece/hour） 3000-5000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-JE/S - 6mm² touch screen stripper with jump tube
Model: JW-JE/S
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-40;rear end:0-40mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: 0.1～6mm²
Max conduit inside diameter:  8mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100MM piece/hour） 3000-4000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-JE2/S - 10mm² touch screen stripper with jump tube,  Motor lifting conduit
Model: JW-JE2/S
Weight: 30KG
Power: 450W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-50;rear end:0-50mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: 0.1～10mm² (BV single strand wire 6mm²)
Max conduit inside diameter:  10mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100MM piece/hour） 3000-4000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-NX2/S - Double wire twisting machine with touch screen
Model: JW-NX2/S
Weight: 38KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 350W
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-30;rear end:0-20mm
Length accuracy: ± (0.002xL)mm
Wire cross section: Double wire 0.1～2.5mm²; Single wire 0.1～4mm²
Max conduit inside diameter:  6mm
Twisting method: Double ended or single ended
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100MM piece/hour） 3000-6000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-HT2/S - Round sheath wire stripper with touch screen
Model: JW-HT2/S
Weight: 30KG
Power: 450W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-150;rear end:0-100mm
Length accuracy: ± (0.002xL)mm
Wire cross section: Maximum outer diameter: 10mm (Round sheath wire)
Max conduit inside diameter:  11mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=200MM piece/hour） 2000-3000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-HT2/6S - HT2 upgraded 6-wheel round sheath wire stripper with touch screen
Model: JW-HT2/6S
Weight: 43KG
Power: 550W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire length range: 1～9999mm
Length accuracy: ± (0.002xL)mm
Wire cross section: Maximum outer diameter: 12mm (Round sheath wire)
Max conduit inside diameter:  13mm
Blade material: High-speed steel
Transport speed: (L=200MM piece/hour） 2000-3000 pieces
Strip length: Full stripping of front end:0-200;Full stripping of rear end:0-100mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-MAX1-4S - 4 wheels, 25mm² wire stripper with touch screen
Model: JW-MAX1-4S
Weight: 33KG
Power: 450W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Strip length: Front end:0-30; rear end:0-20mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: 0.2～25mm² (BV single strand wire 6mm²)
Max conduit inside diameter:  11mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100MM piece/hour） 3000-4000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-MAX1-6S - 6 wheels, 25mm² wire stripper with touch screen
Model: JW-MAX1-6S
Weight: 43KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 550W
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire length range: 1～9999mm
Strip length: Front end:0-80; rear end:0-80mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: 0.2～25mm² (BV single strand wire 6mm²)
Max conduit inside diameter:  11mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100MM piece/hour） 3000-4000 pieces
Driving mode: six-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-MAX1-8S - 8 wheels, 25mm² wire stripper with lifting wheel and touch screen
Model: JW-MAX1-8S
Weight: 50KG
Power: 650W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 4.3 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire length range: 1～9999mm
Strip length: Front end:0-80; rear end:0-80mm
Length accuracy: ± (0.002xL)mm
Intermediate peeling times: 16 times
Wire cross section: 0.2～25mm² (BV single strand wire 6mm²)
Max conduit inside diameter:  11mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100MM piece/hour） 3000-4000 pieces
Driving mode: eight-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-YHT6-4 - Four round high speed sheath inner and outer double layer peeling machine
Model: JW-YHT6-4
Weight: 40KG
Power: 350W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 5 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire cross section:  2-9mm (Round sheath wire)
Number of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
Air pressure: 0.8Mpa
Length accuracy: ± 0.2mm
Max conduit inside diameter:  10mm
Wire length range: Max 10000mm
Outer wire strip length: Full stripping of front end:1-150mm; Full stripping of rear end:1-100mm
Inner core strip length: Front end:0-20; rear end:0-20mm
Blade material: high-speed steel
Transport speed: (L=300MM piece/hour）1500-3000 pieces
Driving mode: four-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-YHT6-6 - Six round high speed sheath inner and outer double layer peeling machine
Model: JW-YHT6-6
Weight: 45KG
Power: 550W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 5 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire cross section:  2-10mm (Round sheath wire)
Number of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
Air pressure: 0.8Mpa
Length accuracy: ± 0.2mm
Max conduit inside diameter:  11mm
Wire length range: Max 10000mm
Outer wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-100mm
Inner core strip length: Front end:0-20; rear end:0-20mm
Blade material: high-speed steel
Transport speed: (L=300MM piece/hour）1500-3000 pieces
Driving mode: six-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-YHT6-8 - Eight round high speed sheath inner and outer double layer peeling machine
Model: JW-YHT6-8
Weight: 50KG
Power: 650W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 5 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire cross section:  2-11mm (Round sheath wire)
Number of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
Air pressure: 0.8Mpa
Length accuracy: ± 0.2mm
Max conduit inside diameter:  13mm
Wire length range: Max 10000mm
Outer wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-110mm
Inner core strip length: Front end:0-20; rear end:0-20mm
Blade material: high-speed steel
Transport speed: (L=300MM piece/hour）1500-3500 pieces
Driving mode: eight-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-YHT6-8D - Eight round double line high speed sheath inner and outer peeling machine
Model: JW-YHT6-8D
Weight: 50KG
Power: 650W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 5 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire cross section: Double wire 2-6mm (Round sheath wire)
Number of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
Air pressure: 0.8Mpa
Length accuracy: ± 0.2mm
Max conduit inside diameter:  7mm
Wire length range: Max 10000mm
Outer wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-110mm
Inner core strip length: Front end:0-20; rear end:0-20mm
Blade material: high-speed steel
Transport speed: (L=300MM piece/hour）1500-6000 pieces
Driving mode: eight-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-YHT5 - Multi-function intelligent sheath inner and outer peeling machine, motor lift wheel
Model: JW-YHT5
Weight: 50KG
Power: 650W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Machine dimension: 560*460*365mm
Wire cross section:  2-12mm (Round sheath wire)
Number of wire cores that can be processed: 2 cores, 3 cores, 4 cores,5cores
Air pressure: 0.8Mpa
Length accuracy: ± 0.2mm
Max conduit inside diameter:  13mm
Wire length range: Max 10000mm
Outer wire strip length: Full stripping of front end:1-210mm; Full stripping of rear end:1-110mm
Second stripping and Half stripping of front end: 1-350;
Half stripping of rear end: 1-150mm
Inner core strip length: Front end:0-20; rear end:0-20mm
Blade material: high-speed steel
Transport speed: (L=300MM piece/hour）1500-6000 pieces
Driving mode: eight-wheels drive (silent hybrid stepper motor, 0.1mm forward per step)
______________________________________________________________________
JW-16ZW - 16 mm² Two-end peeling and bending machine
Model: JW-16ZW
Weight: 35KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 500W
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Strip length: Front end:0.1-30;rear end:0.1-20mm
Length accuracy: ± (0.002xL)mm
Wire cross section: 1.0～16mm²
Max conduit inside diameter:  11mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Bending speed: (L=200MM piece/hour） 2000-3000 pieces
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Bending shape: U-shaped, Z-shaped, clockwise and counterclockwise bending, adjustable bending angle of 30 degrees, 45 degrees, 60 degrees and 90 degrees
______________________________________________________________________
JW-25ZW - 25 mm² Two-end peeling and bending machine
Model: JW-25ZW
Weight: KG
Machine dimension: 470*515*380mm
Power: 650W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (7-inch touch screen)
Air pressure: 0.4-0.6Mpa
Wire cross section: 1.0～25mm²
Max conduit inside diameter:  13mm
Peeling accuracy: ±0.2mm
Strip length: Front end:0-30; rear end:0-20mm
Bending speed: (L=200MM piece/hour） 2000-3000 pieces
Bending shape: U-shaped, Z-shaped, clockwise and counterclockwise bending, adjustable bending angle of 30 degrees, 45 degrees, 60 degrees, 90 degrees~180 degrees
Blade material: High-speed steel
______________________________________________________________________
JW-QG-2S - Multi-functional pipe 2 wheels Cutting machine
Model: JW-QG-2S
Weight: 23KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 150W
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Length accuracy: ± (0.002xL)mm
Max conduit inside diameter:  10mm
Dimension of flat tube: length 100mm*width 22mm* height 4mm
Wire material: yellow wax tube, heat shrinkable tube, sleeve
Blade material: hard tungsten steel
Transport speed: (L=100MM piece/hour） 10000 pieces
Driving mode: two-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-QG-4S - Multi-functional pipe 4 wheels Cutting machine
Model: JW-QG-4S
Weight: 28KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 250W
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1～9999mm
Length accuracy: ± (0.002xL)mm
Max conduit inside diameter:  10mm
Dimension of flat tube: length 100mm*width 22mm* height 4mm
Wire material: yellow wax tube, heat shrinkable tube, sleeve
Blade material: hard tungsten steel
Transport speed: (L=100MM piece/hour） 10000 pieces
Driving mode: two-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-MAX2-ST35 - 35mm² motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
Model: JW-MAX2-ST35
Machine dimension: 560*460*400mm
Weight: 80KG
Power: 600W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Wire cross section: MAX 13mm (Round sheath wire) Wire cross section: 1.0~35mm² (BV wire maximum 35mm², BVR wire maximum 50mm²)
Max conduit inside diameter:  14mm (Motor driven jump tube, no need to connect air pump)
Wire length range: Max 100m
Round sheath outer wire strip length: Front end:1-150mm, rear end:1-100mm 50mm² wire strip length：Front end:1-80mm; rear end:1-80mm
Blade material: high-speed steel
Transport speed: (L=200mm） 2500~3000pieces /hour
Drive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
Driving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
Wire Capacity: BV wire maximum 35mm², BVR wire maximum 50mm²
______________________________________________________________________
JW-MAX2-ST50 - 50mm²motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
Model: JW-MAX2-ST50
Machine dimension: 650*570*425mm
Weight: 108KG
Power: 800W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Wire cross section: MAX 13mm (Round sheath wire) Wire cross section: 1.0~50mm² (BV wire maximum 50mm², BVR wire maximum 70mm²)
Length accuracy: ± 0.2mm
Max conduit inside diameter:  17mm (Motor driven jump tube, no need to connect air pump)
Wire length range: Max 100m
Round sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm 50mm² wire strip length：Front end:1-100mm; rear end:1-100mm
Blade material: high-speed steel
Transport speed: (L=200mm） 3000~3500pieces /hour
Drive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
Driving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
Wire Capacity: BV wire maximum 50mm², BVR wire maximum 70mm²
______________________________________________________________________
JW-MAX2-ST70 - 70mm² motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
Model: JW-MAX2-ST70
Machine dimension: 650*570*425mm
Weight: 108KG
Power: 1000W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Wire cross section: MAX 15mm (Round sheath wire) Wire cross section: 1.0~70mm² (BV wire maximum 50mm², BVR wire maximum 70mm²)
Length accuracy: ± 0.2mm
Max conduit inside diameter:  20mm (Motor driven jump tube, no need to connect air pump)
Wire length range: Max 100m
Round sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm
Strip length: Front end:1-100mm; rear end:1-100mm
Blade material: high-speed steel
Transport speed: (L=200mm） 2500~3000pieces /hour
Drive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
Driving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
Wire Capacity: BV wire maximum 50mm², BVR wire maximum 70mm²
______________________________________________________________________
JW-MAX2-S70 - 70mm² motor lifting conduit, motor screw lifting wheel ,Knife holder with servo motor
Model: JW-MAX2-S70
Machine dimension: 650*570*425mm
Weight: 108KG
Power: 2000W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Wire cross section: MAX 15mm (Round sheath wire) Wire cross section: 1.0~70mm² (BV wire maximum 50mm², BVR wire maximum 70mm²)
Length accuracy: ± 0.2mm
Max conduit inside diameter:  20mm (Motor driven jump tube, no need to connect air pump)
Wire length range: Max 100m
Round sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm 70mm² wire strip length：Front end:1-100mm; rear end:1-100mm
Blade material: high-speed steel
Transport speed: (L=200mm） 3000~3500pieces /hour
Drive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
Driving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
Drive method of knife holder: servo motor driver, ball grinding screw
______________________________________________________________________
JW-MAX2-ST95 - 95mm² motor lifting conduit, motor screw lifting wheel ,Knife holder with stepper motor
Model: JW-MAX2-ST95
Machine dimension: 675*600*1180mm
Weight: 130KG
Power: 1500W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Wire cross section: MAX 18mm (Round sheath wire) Wire cross section: 1.0~95mm² (BV wire maximum 50mm², BVR wire maximum 95mm²)
Length accuracy: ± 0.2mm
Max conduit inside diameter:  22mm (Motor driven jump tube, no need to connect air pump)
Wire length range: Max 100m
Round sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm 95mm² wire strip length：Front end:1-100mm; rear end:1-100mm
Blade material: high-speed steel
Transport speed: (L=200mm） 2500~3000pieces /hour
Drive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
Driving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
Wire Capacity: BV wire maximum 50mm², BVR wire maximum 95mm²
______________________________________________________________________
JW-MAX2-S95 - 95mm² motor lifting conduit, motor screw lifting wheel ,Knife holder with servo motor
Model: JW-MAX2-S95
Machine dimension: 675*600*1180mm
Weight: 130KG
Power: 3000W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Wire cross section: MAX 18mm (Round sheath wire) Wire cross section: 1.0~95mm² (BV wire maximum 70mm², BVR wire maximum 95mm²)
Length accuracy: ± 0.2mm
Max conduit inside diameter:  22mm (Motor driven jump tube, no need to connect air pump)
Wire length range: Max 100m
Round sheath outer wire strip length: Front end:1-200mm, rear end:1-150mm
Strip length: Front end:1-100mm; rear end:1-100mm
Blade material: high-speed steel
Transport speed: (L=200mm） 3000~3500pieces /hour
Drive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
Driving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
Drive method of knife holder: servo motor driver, ball grinding screw
Wire Capacity: BV wire maximum 70mm², BVR wire maximum 95mm²
______________________________________________________________________
JW-MAX3-S185 - 185mm² motor lifting conduit, motor screw lifting wheel ,Knife holder with servo motor
Model: JW-MAX3-S185
Machine dimension: 1260*830*1170mm
Weight: 275KG
Power: 4000W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: 7 inch Chinese and English switching touch screen display
Wire cross section: MAX 25mm (Round sheath wire) Wire cross section: 2.5~185mm² (BV wire maximum 120mm², BVR wire maximum 185mm²)
Length accuracy: ± 0.2mm
Max conduit inside diameter:  27mm (Motor driven jump tube, no need to connect air pump)
Wire length range: Max 400m
Round sheath outer wire strip length: Front end:1-500mm, rear end:1-300mm
Strip length: Front end:1-150mm; rear end:1-150mm
Blade material: high-speed steel
Transport speed: (L=500mm） 1500~2000pieces /hour
Drive method for inlet and outlet weir wheels: screw motor lifts the wheels, and the inlet and outlet wire pressure wheels are automatically adjusted up and down
Driving mode: 8-wheel belt drive (silent hybrid stepper motor, 0.1mm forward per step)
Drive method of knife holder: servo motor driver, ball grinding screw
Wire Capacity: BV wire maximum 120mm², BVR wire maximum 185mm²
______________________________________________________________________
Key Panel Model Series (Protective Cover Optional)
JW-C/N - Two-wheel drive wire stripper
Model: JW-C/N
Weight: 25KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 200W
Operation interface: English/Chinese (LCD display)
Machine dimension: 420*390*260mm
Wire length range: 1-10000mm
Strip length: Front end:0-30;rear end:0-15mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: 0.1-2.5mm2
Max conduit inside diameter: 6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100mm) 4000-5000 pieces/hour
Driving mode: two-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-SD/N - Four-wheel drive wire stripper
Model: JW-SD/N
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-30;rear end:0-15mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: 0.1-4mm2
Max conduit inside diameter: 6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100mm) 4000-5000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-SDB/N - Double wire stripper
Model: JW-SDB/N
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-30;rear end:0-15mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: Double wire 0.1-2.5mm2; Single wire 0.1-4mm2
Max conduit inside diameter: 6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100mm) 5000-10000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-SDB2/N - Double wire stripper with jump tube
Model: JW-SDB2/N
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-30;rear end:0-30mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: Double wire 0.1-2.5mm2; Single wire 0.1-4mm2
Max conduit inside diameter: 6mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100mm) 5000-10000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-E/N - 6mm2 thick wire stripper
Model: JW-E/N
Weight: 28KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 300W
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-35;rear end:0-15mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: 0.1-6mm2
Max conduit inside diameter: 8mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100mm) 3000-5000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-JE/N - 6mm2 thick wire stripper with jump tube
Model: JW-JE/N
Weight: 28KG
Power: 300W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-40;rear end:0-40mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: 0.1-6mm2
Max conduit inside diameter: 8mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100mm) 3000-5000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-JE2/N - 10mm2 thick wire stripper with jump tube
Model: JW-JE2/N
Weight: 30KG
Power: 450W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-50;rear end:0-50mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: 0.1-10mm2
Max conduit inside diameter: 10mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100mm) 3000-5000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-HT2/N - Round sheath wire stripper
Model: JW-HT2/N
Weight: 28KG
Power: 450W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Half stripping of front end:0-150;
Half stripping of rear end: 0-100mm
Length accuracy: +/- (0.002xL)mm
Wire cross section: Maximum outer diameter: 10mm (Flat sheath wire)
Max conduit inside diameter: Flat tube size can be customized
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=200mm) 2000-3000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-BHT2/N - Flat sheath wire stripper
Model: JW-BHT2/N
Weight: 28KG
Power: 450W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Half stripping of front end:0-150;
Half stripping of rear end: 0-100mm
Length accuracy: +/- (0.002xL)mm
Wire cross section: Maximum outer diameter: 10mm (Flat sheath wire)
Max conduit inside diameter: Flat tube size can be customized
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=200mm) 2000-3000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-HT2/6N - Upgraded 6-wheel round sheath wire stripper
Model: JW-HT2/6N
Weight: 43KG
Machine dimension: 560*460*365mm
Power: 550W
Operation interface: English/Chinese (LCD display)
Wire length range: 1-10000mm
Length accuracy: +/- (0.002xL)mm
Wire cross section: Maximum outer diameter: 12mm (Round sheath wire)
Max conduit inside diameter: 13mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Strip length: Full stripping of front end:0-200;Full stripping of rear end:0-100mm
Blade material: High-speed steel
Transport speed: (L=200mm) 3000-4000 pieces/hour
______________________________________________________________________
JW-PX2-S - Flat wire branching machine, max 12P
Model: JW-PX2-S
Weight: 34KG
Electrical connection: 110V/220V 50HZ/60HZ
Power: 450W
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-15;rear end:0-15mm
Length accuracy: +/- (0.002xL)mm
Branching wire width: 2-12P
Dimension of flat tube: length 100mm*width 22mm* height 4mm
Suitable for stripping wire: flat wire
Blade material: hard tungsten steel
Transport speed: (L=100mm) 3000-5000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-NX2/N - Double wire stripping and twisting machine
Model: JW-NX2/N
Weight: 38KG
Power: 350W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-30;rear end:0-20mm
Length accuracy: +/- (0.002xL)mm
Wire cross section: Double wire 0.1-2.5mm2; Single wire 0.1-4mm2
Max conduit inside diameter: 6mm
Twisting method: Double ended or single ended
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: hard tungsten steel
Transport speed: (L=100mm) 3000-6000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed, wire feeding speed and twisting speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-MAX1-4/N - 4 wheels, 25mm2 wire stripper
Model: JW-MAX1-4/N
Weight: 31KG
Power: 450W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 460*470*325mm
Wire length range: 1-10000mm
Strip length: Front end:0-30;rear end:0-20mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: 0.2-25mm2 (BV single strand wire 6mm2)
Max conduit inside diameter: 11mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100mm) 3000-4000 pieces/hour
Driving mode: four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-MAX1-6/N - 6 wheels, 25mm2 wire stripper
Model: JW-MAX1-6/N
Weight: 43KG
Power: 550W
Electrical connection: 110V/220V 50HZ/60HZ
Operation interface: English/Chinese (LCD display)
Machine dimension: 560*460*365mm
Wire length range: 1-10000mm
Strip length: Front end:0-80;rear end:0-80mm
Length accuracy: +/- (0.002xL)mm
Intermediate peeling times: 13 times
Wire cross section: 0.2-25mm2 (BV single strand wire 6mm2)
Max conduit inside diameter: 11mm
Wire material: PVC,Teflon,Braided,Fiberglass wire
Blade material: High-speed steel
Transport speed: (L=100mm) 3000-4000 pieces/hour
Driving mode: six-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
JW-MAX1-8/N - 8 wheels, 25mm2 wire stripper with lifting wheel
Model: JW-MAX1-8/N
Weight: 50KG
Machine dimension: 560*460*365mm
Power: 650W
Operation interface: English/Chinese (LCD display)
Wire length range: 1-10000mm
Strip length: Front end:0-80;rear end:0-80mm
Length accuracy: less than 0.002xL mm
Wire cross section: 0.2-25mm2 (BV single strand wire 6mm2)
Max conduit inside diameter: 11mm
Intermediate peeling times: 13 times
Blade material: High-speed steel
Transport speed: (L=100mm) 3000-5000 pieces/hour
Driving mode: eight-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)
Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)
______________________________________________________________________
Xiamen Jingwei Technology Co., Ltd.