The WPM-200 strips and twists single-core wire in one cycle, taking 1-4 mm (AWG 14-22) cable and removing 2 mm to 20 mm of insulation from the end. The 120 W unit weighs 15 kg and measures 300 x 200 x 160 mm, so it can stand on a bench or a trolley beside a cutting line.
This job normally needs two hand tools, one to strip and one to twist, and the twisted length depends on how far the operator turns the pliers. Here the wire is pushed into the round head, a pneumatic cylinder closes the blades and the same cycle twists the exposed strands; blade gap and strip depth are set once, so every lead leaves with the same copper length and the same lay.
Against the WPM-550 it works on insulated 1-4 mm single core and adds the twist; against the JW-ST03 it is the smaller fixed-head unit for one wire at a time, while the ST03 covers sheathed, multi-core and flat cable on a larger frame with its own air circuit.
Key Features
1. 1-4 mm (AWG 14-22) single-core range with strip length from 2 mm to 20 mm.
2. Strip and twist in one cycle, so there is no second pass and no hand twisting of the strands.
3. Pneumatic blade closing: the cylinder supplies the cutting force and the operator only positions the wire against the depth stop.
4. Toggle start and red stop button on the head, within thumb reach of the wire entry.
5. Air filter-regulator with gauge and lubricator mounted on the side of the housing, so working pressure is set at the machine.
6. 120 W, 15 kg, 300 x 200 x 160 mm, compact enough to share an air drop with a bench press.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-200 |
|---|
| Machine type | Semi-automatic pneumatic wire stripping and twisting machine |
|---|
| Available wire size | AWG 14-22 |
|---|
| Wire size | 1-4 mm |
|---|
| Stripping length | 2-20 mm |
|---|
| Power | 120 W |
|---|
| Dimensions | 300 x 200 x 160 mm |
|---|
| Net weight | 15 kg |
|---|
Applications
— Control panel wiring: stripping and twisting single core before fitting ferrules.
— Appliance power cords: preparing conductor ends for terminal screws.
— Automotive harness shops: strip-and-twist on AWG 14-22 leads before crimping.
— Lighting and electrical assembly: twisting stranded ends for screw terminals and connector blocks.
— Panel builders and switchgear: repeatable strip length on short hook-up wires.