WPM-4000S is a semi-automatic 4 ton terminal crimping machine with a 30 mm stroke, running on single-phase AC 220 V at 50/60 Hz. The frame measures 380 mm wide, 280 mm deep and 470 mm high and weighs 95 kg, close to twice the mass of the 3 ton model, which is where the 4 ton rating is carried.
Two things separate it from an air or treadle press in daily use. The ram is driven electrically, so the crimp does not change when the shop air line is loaded by other stations, and the sound at the die is one short mechanical stroke rather than a cylinder exhaust. The applicator sits under the guard plate at the front, so a mold change is made from the operating position.
Within the S series the 4000S is the second-highest force at 4 ton, one step above the 3000S and twice the 2000S, with the same 30 mm stroke as both. Only the 8000S goes beyond it, at 8KN with a 40 mm stroke on a 200 kg floor frame. For work that stays on 30 mm applicators and terminals in the 4 ton class, the 4000S is the last bench model before that jump in size.
Key Features
1. 4 ton press capacity for terminals that stall a 2 or 3 ton frame
2. 30 mm stroke, matching the 1500S, 2000S and 3000S
3. Single-phase AC 220 V 50/60 Hz supply, no three-phase drop needed
4. 95 kg frame at 380 x 280 x 470 mm, weighted for the 4 ton load
5. Low-noise electric drive with a steady crimp independent of shop-air pressure
6. Guard plate over the applicator and foot pedal operation, with the die accessible from the front
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-4000S |
|---|
| Press capacity | 4 Ton |
|---|
| Stroke | 30 mm |
|---|
| Power | AC 220V 50/60 Hz (single-phase) |
|---|
| Dimension | 380W x 280L x 470H mm |
|---|
| Weight | 95 KG |
|---|
Applications
— Automotive battery and earth leads: heavy ring terminals crimped at 4 ton
— White goods and HVAC harnesses: larger pre-insulated terminals on main power leads
— Panel builders crimping lugs and ring terminals on incoming supply cables
— Harness shops running 2 to 4 ton applicators on one press line
— Motor lead termination, where the barrel has to close fully on a stranded conductor