55-Ton Vertical Plastic Injection Molding Machine WPM-701-5.5T
55-Ton Vertical Plastic Injection Molding Machine WPM-701-5.5T Thumb
Video Thumbnail

55-Ton Vertical Plastic Injection Molding Machine WPM-701-5.5T

  • Model No: WPM-701-5.5T

  • Specifications

    Model Number: WPM-701-5.5T
    Clamping Force: 55 tons
    Screw Diameter: 32mm / 35mm / 42mm
    Max Injection Weight (PS): 102g / 123g / 176g
    Safe Shot Weight: 3.6oz / 4.3oz / 6.0oz
    Screw Stroke: 140mm
    Screw Speed: 0-190 rpm
    Nozzle Contact Force: 5.5 tf
    Opening Stroke: 200mm
    Mold Space: 670x480mm
    Min. Mold Thickness: 250mm/200mm
    Hydraulic Ejector Force: 1.5 tons
    Injector Stroke: 35mm
    Injection Pressure: 1642 / 1385 / 960 kg/cm²
    Oil Tank Capacity: 150L
    Drive Motor: 12 kW
    Dimensions: 2x1.4x3.3m
    Weight: 3300 kg
  • Inquiry now
Vertical Type Injection Moulding Machine WPM-701-5.5T 
Injection Moulding Machine, Plastic Injection Moulding Machine, Vertical Injection Molding Machine
Description:
1. WPM-701-5.5T vertical injection molding machine lock mold/vertical to cast, IS suitable for the common electric appliance plug, the electronic components, and so on small inlays to take shape.
2. Two(three sections)the temperature control/projects the speed/back pressure and so on not to have the section adjustment, suits components of the precise vertex to take shape.
3. WPM-701-5.5T injection molding machine fast lock mold/low pressure idling speed closes the mold, locks the mold exceptionally when then Automatically tight open the mold. This special safe design, and so on can get up the protective function to the mold.
4. The stop-ping die fixed/op die activity type, takes shape inlays to have a very good localization in the mold. The end product has the fluid capping to leave the installment, the end product takes out extremely facilitates easily.
5. WPM-701-5.5T injection molding machine electrically controlled fitting/hydraulic pressure fitting uses the domestically produced nWPM-e brand The precise durable revolution noise is low. Locks mold strength 15TON - 55TON, has PLC to program- the Electrically controlled computer single to press the control or the computer entire program- the electrically controlled computer single to press the control or the computer entire proportion(ratio presses ratio to flow )controls three kinds, may supply the customer choice.
6. May supplement Sand up mold IS with double slippery mold 2S. Lets the operator has more convenient Production efficiency Gauguin security.

Specification
Model    WPM-701-5.5T
Screw diWPM-enter (mm)    ¢32 / ¢35 / ¢42
(PS)Max Injection weight (g)    102 / 123 / 176
(PS)Safe Shot Weight (oz)    3.6 / 4.3 / 6.0
Screw stroke (mm)    140
Screw speed rotation (r.p.m.)    0-190
Nozzle contact force (t f)    5.5
ClWPM-ping force (tons)    55
Opening stroke (mm)    200
Mold space (mm)    670x480
Min. thickness of mold (mm)    250/200
Hydraulic ejector force (tons)    1.5
Injector stroke (mm)    35
Injection pressure (kg/cm2)    1642 / 1385 / 960
Oil tank capacity (L)    150
Drive motor (kW)    12
Dimensions (L x W x H)M    2x 1.4x3.3
Weight (kg)    3300
Vertical Injection Molding Machine WPM-701-5.5T
Vertical Injection Molding Machine WPM-701-5.5T

Send us your question about this product

Verification Code Image

Related products

55-Ton Vertical Plastic Injection Molding Machine WPM-701-5.5T

55-Ton Vertical Plastic Injection Molding Machine WPM-701-5.5T

Inquiry now
35 Ton Vertical Plastic Injection Molding Machine WPM-701-3.5T

35 Ton Vertical Plastic Injection Molding Machine WPM-701-3.5T

Inquiry now
45-Ton Vertical Plastic Injection Molding Machine WPM-701-4.5T

45-Ton Vertical Plastic Injection Molding Machine WPM-701-4.5T

Inquiry now
HDMI Cable Connector Injection Molding Machine 250ST

HDMI Cable Connector Injection Molding Machine 250ST

Inquiry now