The JW-CM06 works 2P parallel wire from one end to the other in a single cycle: the pair is cut to length, stripped, both conductors dip-tinned at one end, then terminals are crimped on the opposite end and the pair is pushed into a 2P shell. The two conductors stay at a fixed pitch from the feed rollers to the insertion station, which is the part hand assembly cannot hold.
Split across equipment, the job needs a tinning pot, a crimping press and a bench fixture for the shell, with the wire counted and handled between each step. Here one operator loads the reel and unloads classified parts. Pressure monitoring, a CCD vision check and CPK tracking run on every cycle, defective pieces are ejected rather than packed, and pull-out force is analysed at set-up so the crimp height is proven before the batch runs.
The JW-CM06 is the 2P specialist of the group: a 25-450 mm length window, 1.25, 2.0 and 2.5 terminals, and the only model here carrying CCD, pressure and CPK monitoring on the same machine. The WPM-DPW12 goes wider on shells, 2P to 12P, without that instrumentation; the WPM-5505 inserts housings at 530-650 times per hour on 32-18 AWG. Where the harness is a two-core lead with a tinned supply end and a 2P plug, the CM06 is the closest fit.
Key Features
1. Cut, strip, dip-tin, crimp and 2P shell insertion in one cycle, one end tinned and the opposite end assembled with terminals
2. Dedicated 2P parallel wire handling, both conductors held at fixed pitch through insertion
3. Terminal sizes 1.25, 2.0 and 2.5
4. Wire length range 25-450 mm
5. Pressure monitoring, CCD vision system and CPK value tracking on each cycle
6. Defective-product ejection, good and bad counting, pull-out force analysis; modular station structure
Technical Specifications
| Parameter | Specification |
|---|
| Model | JW-CM06 |
|---|
| Processing Functions | Cutting, stripping, tinning, crimping, shell insertion |
|---|
| Wire Type | 2P parallel wire |
|---|
| Wire Length Range | 25-450 mm |
|---|
| Terminal Compatibility | 1.25 / 2.0 / 2.5 |
|---|
| Monitoring | Pressure monitoring, CCD vision system, CPK value system |
|---|
| Quality Control | Defective product filtering, pull-out force analysis, good/bad counting |
|---|
| Structure | Modular, automatic feeding |
|---|
Applications
— Appliance and power tool two-core cords: 2P parallel wire, tinned at the supply end, 2P shell at the board end
— LED drivers and small power supplies: 1.25 and 2.0 terminals into 2P white shells
— Battery chargers and adapters: short 25-450 mm two-core leads
— Fan, sensor and switch looms: two-core zip cord with a tinned free end