The WPM-B1L strips, cuts, winds and ties cable in a single pass, for cable from 4 to 8 mm outer diameter over winding lengths of 3 to 20 m.
Cable at this diameter is stiff enough that hand-coiling a 20 m length takes two people, and a stripped end is easily bent while the bundle is handled. The machine strips and winds in line from a separate payoff stand, so the coil is formed once and leaves tied, with no re-coiling before packing.
Within the group the B1L is the large-diameter model: 4-8 mm OD, 3-20 m lengths and 250-380 pcs/h on a 3.5 kW drive. The CRO and HCRO run USB/DC-size cable at up to 700 pcs/h; the 02SL stops at 5 mm but strips both ends and ties to 20 mm; the 02L applies the same 4-8 mm range to tube rather than cable.
Key Features
1. Four operations in line: stripping, cutting, winding and tying, for 4-8 mm cable.
2. Winding lengths from 3 to 20 m, formed on the coiler and fed from a separate payoff stand.
3. Output 250-380 coils per hour, matched to the heavier 4-8 mm cable rather than small USB wire.
4. 3.5 kW drive on 110/220 V, 50/60 Hz supply; 1900 x 750 x 1900 mm footprint, 380 kg.
5. Stripping head prepares the cable end inside the cycle, so the coil leaves with a finished lead.
6. Tower lamp and four inspection windows show station status without opening the guards.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-B1L |
|---|
| Function | Stripping, cutting, winding, tying |
|---|
| Wire outer diameter | 4-8 mm |
|---|
| Winding length | 3-20 m |
|---|
| Productivity | 250-380 pcs/h |
|---|
| Power supply | 110 / 220 V, 50-60 Hz |
|---|
| Power | 3.5 kW |
|---|
| Dimension | 1900 x 750 x 1900 mm |
|---|
| Weight | 380 kg |
|---|
| Payoff | Separate reel stand |
|---|
Applications
— AC power cable 4-8 mm: stripped, wound and tied for appliance assembly.
— DC output cable: 3-20 m coils with a prepared lead end.
— Extension and jumper leads: coiled and tied for retail packing.
— Cable assembly houses: in-line stripping and coiling of larger-gauge cable.
— Machine builders: cut-to-length tied coils for equipment wiring.