Automatic Cotton Thread Cutting Winding Tying Machine WPM-81S
Automatic Cotton Thread Cutting Winding Tying Machine WPM-81S Thumb Automatic Cotton Thread Cutting Winding Tying Machine WPM-81S Thumb
Video Thumbnail

Automatic Cotton Thread Cutting Winding Tying Machine WPM-81S

📅 2026-05-15 👁️ 1,937
  • Model No: WPM-81S

  • Specifications

    Automatic Cotton Thread Cutting Winding Tying Machine WPM-81S
    Theoretical Output: 1200pcs/h
    Voltage Requirement: 210-240V 5A
    Power Consumption: 1500W
    Wire Diameter: ≤40mm
    Cutting Line Length: ≤10M
    Winding Spacing: 70-150mm
    Dimensions: 750*1550*1850 mm
    Air Pressure: 0.4-0.55MPa
    Suitable Core Weight: 600kg
  • Inquiry now

The WPM-81S cuts, winds and ties cotton thread in one automatic cycle. Thread is drawn from the package, cut to a length of up to 10 m, wound at 70-150 mm spacing and closed with a figure-8 single tie before dropping into the collection bin. Rated output is 1200 pcs/h.

Handling thread by hand means measuring, reeling a hank, tying it off and stacking it, with tie tension varying from operator to operator. The machine holds one tie configuration per setting and repeats it for the whole run. Because it accepts packages up to 600 kg, the supply is changed once per shift rather than every few kilograms, which is where most of the idle time sits on a manual bench.

This is the thread and fibre path of the range: the same cut-wind-tie sequence used on the cable coilers, with a feed and tension system set for yarn rather than jacketed cable. It also runs at the highest rate of the single-station machines here, 1200 pcs/h, on a 1500 W drive and only 0.4-0.55 MPa of air, so the air demand is lower than the cable units running at 0.6-0.8 MPa.

Key Features

1. Cut, wind and tie in one pass: thread goes from package to tied hank without an intermediate reeling step.

2. Figure-8 single tie: one tie per hank, tension set at the tying head and repeated across the run.

3. 1200 pcs/h theoretical output: the highest single-station rate in this range, on a 1500 W drive.

4. Cut length up to 10 m, winding spacing 70-150 mm, coil diameter up to 40 mm.

5. 600 kg package capacity: heavy yarn packages run without reloading, which removes most supply changes per shift.

6. Low air and power demand: 0.4-0.55 MPa air, 210-240 V 5 A supply, 750 x 1550 x 1850 mm footprint.

Technical Specifications

ParameterSpecification
Model NumberWPM-81S
Theoretical Output1200 pcs/h
Voltage Requirement210-240 V, 5 A
Power Consumption1500 W
Wire Diameter≤40 mm
Cutting Line Length≤10 m
Winding Spacing70-150 mm
Suitable Core Weight600 kg
Air Pressure0.4-0.55 MPa
Dimensions750 x 1550 x 1850 mm

Applications

— Cotton thread converting: grey and dyed yarn cut to length and tied into figure-8 hanks for wholesale bales.

— Cable harness filler thread: cotton binding thread supplied in counted, tied coils to harness assembly benches.

— Garment and upholstery thread: retail packs of matched-length thread bundles with a repeatable count.

— Twine and braided cord: small-diameter cordage coiled and tied for hardware and garden retail packs.

— Textile repacking: bulk packages split into fixed-length tied hanks at one station instead of a manual bench.

Automatic Cotton Thread Cutting Winding Tying Machine WPM-81S

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each