Automatic 8-Word Single Tie Cable Winding & Binding Machine WPM-81M
Automatic 8-Word Single Tie Cable Winding & Binding Machine WPM-81M Thumb
Video Thumbnail

Automatic 8-Word Single Tie Cable Winding & Binding Machine WPM-81M

📅 2026-03-14 👁️ 517
  • Model No: WPM-81M

  • Specifications

    Model Number: WPM-81M
    Applicable Cable: AC/DC/USB cable winding, 8-word single strap
    Max Wire Length: 6 m or less
    Max Wire Diameter: Φ 6.2 mm or less
    Voltage Requirement: 210-240V 5A
    Wind Spacing: 70-200mm
    Machine Power: ≤2000W
    Bundle Diameter: ≤ 55mm
    Head Length: 0-130 mm
    Tail Length: >0 mm
    Production Efficiency: 1800pcs/hour (winding 3 times, 1m length)
  • Inquiry now

The WPM-81M folds AC, DC and USB cable into an 8-word shape and closes it with a single strap at the centre. It takes cable up to 6.2 mm outer diameter and 6 m length, sets the fold on a 70-200 mm winding part distance, and closes the bundle at up to 55 mm diameter.

Power cords are the hard case for hand tying: a moulded plug will not pass a tight tie, and the fold has to leave 0-130 mm of head free on each side. The 81M holds head length and fold width from piece to piece, applies the single strap inside the cycle, and is rated at 1800 pcs/h at 1 m length and 3 turns, so the operator places the plug and lifts the coil.

It shares the 6.2 mm, 6 m and 55 mm envelope with the WPM-81 but fixes the 8-word fold and quotes 1800 pcs/h; the 81M3 covers only 4 mm and 3 m on a 45-80 mm fold, and the 82M goes to 10 mm and 8 m with two ties. Where the 82M doubles the tie, the 81M relies on one strap at the centre of the fold.

Key Features

1. 8-word winding with a single central strap, giving a flat coil with both plugs facing out.

2. Fold width of 70-200 mm, covering 1-6 m power and DC leads.

3. Cable range up to 6.2 mm OD and 6 m length on the same head.

4. Bundle closes at 55 mm diameter, with head length 0-130 mm and tail above 0 mm.

5. Rated 1800 pcs/h at 1 m winding length and 3 turns.

6. 210-240 V 5 A supply, power under 2000 W, HMI panel on the head and foot-pedal cycle start.

Technical Specifications

ParameterSpecification
Model NumberWPM-81M
Applicable CableAC / DC / USB cable, 8-word single strap
Max Wire Length6 m or less
Max Wire DiameterΦ 6.2 mm or less
Voltage Requirement210 - 240 V, 5 A
Wind Spacing70 - 200 mm
Machine Power≤ 2000 W
Bundle Diameter≤ 55 mm
Head Length0 - 130 mm
Tail Length> 0 mm
Production Efficiency1800 pcs/h (3 winds, 1 m length)

Applications

— Power cord assembly: 1-3 m AC cords with moulded plugs folded and single-strapped at the centre.

— DC adapter leads: output cables coiled without loading the moulded strain relief.

— USB and data cable: 1-2 m leads folded to a 70-200 mm width for retail packing.

— Set-top box and monitor leads: cable bundled with the plug left free for immediate use.

— Cable assembly house: mixed AC, DC and USB runs on one head at 1800 pcs/h.

Upgraded Figure-8 Wire Winder WPM-81M

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each