The WPM-R9B strips both ends of the wire, half-strips where the sequence calls for it, and crimps a loose terminal on one end. Cutting runs 50 mm to 9999 mm with a strip length of 1.5 mm to 10 mm; the terminal is oriented and fed from a vibratory bowl into a cassette mold and pressed at 2 T or 3 T, at 3000 pcs/h single-end.
Loose terminals are the slow part of low-volume harness work: a ratchet hand tool needs a terminal picked by hand for every crimp, and the result depends on how hard the operator squeezes. Here the bowl feeds the terminal, the cassette die holds it square to the wire axis, and the press applies a fixed 2 to 3 T stroke, so the operator loads wire and removes finished leads and the crimp height no longer varies with operator force.
This is the loose-terminal machine of the group and the only one specified by wire diameter rather than gauge: up to 6 mm, with both ends stripped and one end crimped at 3000 pcs/h. The reel-fed double-end JW-CM09 runs 4800 pcs/h and the single-end WPM-151 up to 8000 pcs/h, so the WPM-R9B trades cycle speed for terminal flexibility, taking loose terminals through a quick-change cassette mold instead of a dedicated reel applicator.
Key Features
1. Single-end terminal crimping with both ends stripped and half-strip available
2. Loose terminal feed from a vibratory bowl into a quick-change cassette mold
3. Wire size up to 6 mm diameter; cutting 50 - 9999 mm at plus or minus 0.1 mm plus length x 0.002
4. Output 3000 pcs/h on single-end crimping; strip length 1.5 mm to 10 mm
5. Press capacity 2 T or 3 T, compressed air 4 - 6 kgf
6. Single phase AC220 V 20 A; 650 W x 700 L x 1500 H mm, 308 kg
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-R9B |
|---|
| Function | Both-end stripping, half stripping, single-end crimping |
|---|
| Terminal Type | Loose terminal, cassette mold |
|---|
| Wire Size | Up to 6 mm diameter |
|---|
| Capacity | 3000 pcs/h single-end crimping |
|---|
| Cutting Length | 50 - 9999 mm |
|---|
| Cutting Accuracy | plus or minus 0.1 + (set length x 0.002) |
|---|
| Strip Length | 1.5 - 10 mm |
|---|
| Press Capacity | 2 T / 3 T |
|---|
| Power | Single phase AC220 V 20 A |
|---|
| Compressed Air | 4 - 6 kgf |
|---|
| Dimensions | 650 W x 700 L x 1500 H mm |
|---|
| Weight | 308 kg |
|---|
Applications
— Low-volume and mixed harness runs using loose ring, fork and blade terminals
— Panel and enclosure wiring up to 6 mm wire with loose compression lugs
— Repair and aftermarket leads where a cassette mold change is faster than a reel change
— Earth and ground leads with heavy loose lugs at 3 T press capacity
— Sampling and prototype builds that cannot justify a dedicated reel terminal