Cordless Handheld Wire Harness Taping Machine AT-101G
Cordless Handheld Wire Harness Taping Machine AT-101G Thumb
Video Thumbnail

Cordless Handheld Wire Harness Taping Machine AT-101G

📅 2026-03-16 👁️ 271
  • Model No: AT-101G

  • Specifications

    Model Number: AT-101G
    Machine Dimensions: 250*300*280mm
    Machine Weight: 1kg
    Battery Capacity: 6000mAh
    Battery Voltage: 10-21V
    Battery Current: 4.0A
    Battery Weight: 0.6kg
    Winding Speed Settings: 150rpm, 200rpm, 350rpm, 500rpm
    Tape Width Range: 10-25mm
    Tape Outer Diameter:
    Tape Inner Diameter: 38mm
    Tape Types: PVC, Nylon, Bucky
    Winding Diameter Range: 3mm-35mm
    Battery Continuous Use Time: 5 hours
  • Inquiry now

The AT-101G is a cordless handheld for wrapping harness branches. It covers winding diameters from 3 mm to 35 mm, takes tape 10-25 mm wide with a 38 mm core and up to 110 mm outside diameter, and runs PVC, nylon or Bucky tape. The head turns at 150, 200, 350 or 500 rpm, and the 6000 mAh battery gives five hours of continuous use.

On a small branch the limit of hand taping is not the tape but the wrist: the roll has to orbit a 3 mm lead inside a connector cavity, and the wrap count per second changes with every turn. The AT-101G drives the tape ring at a fixed speed, so the operator guides the tool along the branch and the rotation stays constant from the first wrap to the last. The body is 1 kg, which matters when the tool is held out at arm's length for a full shift.

The AT-101G is the lightest and fastest of the handhelds here at 1 kg and 500 rpm, and the only one specified with a 3-35 mm winding range and a list of accepted tape types. The AT-101 (430) is heavier at 1.95 kg with 9-25 mm tape and a 120 rpm maximum; the AT-101L (487) is the wide-tape unit at 3-52 mm; the AT-101D (488) is the same battery class on a desktop stand. Choose the AT-101G where the branch is 3-35 mm, the tape is PVC, nylon or Bucky, and a 110 mm roll needs to fit.

Key Features

1. Winding diameter range 3-35 mm

2. Tape width 10-25 mm, core 38 mm, roll up to 110 mm outside diameter

3. Accepts PVC, nylon and Bucky tape

4. Four speeds: 150, 200, 350 and 500 rpm

5. 6000 mAh battery, 10-21 V, 4.0 A, 5 hours continuous

6. 1 kg body, 250 x 300 x 280 mm

Technical Specifications

ParameterSpecification
ModelAT-101G
TypeCordless handheld
Winding diameter range3-35 mm
Tape width range10-25 mm
Tape outer diameterUnder 110 mm
Tape inner diameter38 mm
Tape typesPVC, nylon, Bucky
Speed settings150 / 200 / 350 / 500 rpm
Battery6000 mAh, 10-21 V, 4.0 A, 0.6 kg
Battery runtime5 hours continuous
Machine weight1 kg
Dimensions250 x 300 x 280 mm

Applications

— Wire harness assembly - wrapping 3-35 mm branches on automotive and appliance looms

— Sensor and small-gauge leads - taping 3 mm leads and twisted pairs close to the connector

— Electronics production - wrapping cable inside a chassis where a fixed head does not fit

— Medical device cable - taping thin leads to a repeatable wrap count

— Aftermarket harness building - cordless wrapping at the vehicle or machine

AT-101G blue cordless handheld wire harness taping machine side view with batteryRear view of AT-101G showing open C-shaped tape ring and 21V batteryAT-101G taping machine kit with battery, charger and accessories in foam carton
Cordless Handheld Harness Taping AT-101G

Send us your question about this product

No file chosen
JPG / PNG / WebP, up to 10 MB each