The WPM-320 is a fully automatic processor for flat double-layer cable: it cuts, strips both ends and twists on 2 x (0.3-2.0 mm2) flat cord, and can be set for middle stripping. Cutting length is 0.1-99,999.9 mm, sheath strip 0.1-250 mm at the head and 0.1-70 mm at the tail, inner core 0.1-30 mm at both ends, at 0.01 mm accuracy and 500-1,500 pcs/h.
Flat double-layer cord is two insulations in one profile - an outer sheath over parallel cores - and the failure mode is a blade that reaches the sheath but scores the core, or one that reaches the core but leaves a sheath tag. The 320 positions with a silent hybrid stepper motor at 0.01 mm, and holds sheath and core stripping as separate program values at each end, so the sheath is opened to 250 mm while the cores are stripped to 30 mm. The blade is imported tungsten steel or high-speed steel.
The 320 is the flat-cord machine in this group. The WPM-YHT3 (463) opens round double-layer cable of 2-7 mm diameter with 2-4 cores under 0.8 MPa air, and the WPM-680 (281) covers sheathed multicore up to 30 mm2 with rewinding. Where the cable is flat twin or flat multi-core cord, the 320 is the frame with a feed set for that profile.
Key Features
1. Flat double-layer range 2 x (0.3-2.0 mm2): twin and flat multi-core cord processed as a profile, with twisting applied after the strip.
2. Sheath and core stripping set separately per end: 0.1-250 mm sheath at the head, 0.1-70 mm at the tail, 0.1-30 mm on the cores at both ends.
3. 0.01 mm stripping accuracy from a silent hybrid stepper motor, which is what keeps a 0.3 mm2 core intact under a 250 mm sheath window.
4. Middle stripping available as a custom setting, so a window can be opened mid-span for a splice or a moulded strain relief.
5. Dual-end twisting after stripping, with cut length programmable from 0.1 to 99,999.9 mm and output of 500-1,500 pcs/h.
6. Automatic entry and exit, timing start for batch runs, and jog adjustment for setting the blade without a test cut.
Technical Specifications
| Parameter | Specification |
|---|
| Model | WPM-320 |
|---|
| Machine type | Automatic flat double-layer cable cutting, stripping and twisting machine |
|---|
| Function | Cutting, double-end stripping and twisting, middle stripping |
|---|
| Wire range | 2 x (0.3-2.0 mm2) + twisting |
|---|
| Cutting length | 0.1-99,999.9 mm |
|---|
| Sheath stripping length | Head 0.1-250 mm / Tail 0.1-70 mm |
|---|
| Core stripping length | Head 0.1-30 mm / Tail 0.1-30 mm |
|---|
| Stripping accuracy | 0.01 mm |
|---|
| Capacity | 500-1,500 pcs/h |
|---|
| Blade material | Imported tungsten steel / high-speed steel |
|---|
| Power | AC110V/220V 50/60Hz |
|---|
| Body size | 565 x 385 x 370 mm |
|---|
| Body weight | 43 kg |
|---|
Applications
— Flat twin appliance cord: 2 x 0.75-1.5 mm2 flat PVC cord cut to 500-2,000 mm, sheath opened at both ends and cores stripped to terminal depth.
— Lighting and luminaire leads: flat cord with a long sheath window at the luminaire end and a short strip at the plug end.
— Small appliance and power tool cord sets: 2 x 1.0 mm2 flat cord, both ends stripped and twisted before tinning.
— Extension and adapter assemblies: flat multi-core cord cut to fixed lengths with a mid-span window for an inline switch, using the middle strip setting.
— Heating and signal flat cable: 2 x 0.3-0.5 mm2 flat profile cut and stripped where a compact termination is required.